When the documentation says that the PHP parser ignores everything outside the <?php ... ?> tags, it means literally EVERYTHING. Including things you normally wouldn't consider "valid", such as the following:
<html><body>
<p<?php if ($highlight): ?> class="highlight"<?php endif;?>>This is a paragraph.</p>
</body></html>
Notice how the PHP code is embedded in the middle of an HTML opening tag. The PHP parser doesn't care that it's in the middle of an opening tag, and doesn't require that it be closed. It also doesn't care that after the closing ?> tag is the end of the HTML opening tag. So, if $highlight is true, then the output will be:
<html><body>
<p class="highlight">This is a paragraph.</p>
</body></html>
Otherwise, it will be:
<html><body>
<p>This is a paragraph.</p>
</body></html>
Using this method, you can have HTML tags with optional attributes, depending on some PHP condition. Extremely flexible and useful!
PHP - Manual: 从 HTML 中分离
2024-11-14
从 HTML 中分离
凡是在一对开始和结束标记之外的内容都会被 PHP 解析器忽略，这使得 PHP 文件可以具备混合内容。 可以使 PHP 嵌入到 HTML 文档中去，如下例所示。
<p>This is going to be ignored by PHP and displayed by the browser.</p>
<?php echo 'While this is going to be parsed.'; ?>
<p>This will also be ignored by PHP and displayed by the browser.</p>
使用条件结构：
示例 #1 使用条件的高级分离术
<?php if ($expression == true): ?>
This will show if the expression is true.
<?php else: ?>
Otherwise this will show.
<?php endif; ?>
要输出大段文本时，跳出 PHP 解析模式通常比将文本通过 echo 或 print 输出更有效率。
注意:
此外注意如果将 PHP 嵌入到 XML 或 XHTML 中则需要使用
<?php ?>标记以保持符合标准。
add a note
User Contributed Notes 12 notes
quickfur at quickfur dot ath dot cx ¶
11 years ago
ravenswd at gmail dot com ¶
12 years ago
One aspect of PHP that you need to be careful of, is that ?> will drop you out of PHP code and into HTML even if it appears inside a // comment. (This does not apply to /* */ comments.) This can lead to unexpected results. For example, take this line:
<?php
$file_contents = '<?php die(); ?>' . "\n";
?>
If you try to remove it by turning it into a comment, you get this:
<?php
// $file_contents = '<?php die(); ?>' . "\n";
?>
Which results in ' . "\n"; (and whatever is in the lines following it) to be output to your HTML page.
The cure is to either comment it out using /* */ tags, or re-write the line as:
<?php
$file_contents = '<' . '?php die(); ?' . '>' . "\n";
?>
sgurukrupa at gmail dot com ¶
8 years ago
Although not specifically pointed out in the main text, escaping from HTML also applies to other control statements:
<?php for ($i = 0; $i < 5; ++$i): ?>
Hello, there!
<?php endfor; ?>
When the above code snippet is executed we get the following output:
Hello, there!
Hello, there!
Hello, there!
Hello, there!
snor_007 at hotmail dot com ¶
12 years ago
Playing around with different open and close tags I discovered you can actually mix different style open/close tags
some examples
<%
//your php code here
?>
or
<script language="php">
//php code here
%>
anisgazig at gmail dot com ¶
2 years ago
Version of 7.0.0,3 tags are available in php.
1.long form tag (<?php ?>)
2.short echo tag(<?= ?>)
3.short_open_tag(? ?)
You can use short_open_tag when you start xml with php.
mike at clove dot com ¶
11 years ago
It's possible to write code to create php escapes which can be processed later by substituting \x3f for '?' - as in echo "<\x3fphp echo 'foo'; \x3f>";
This is useful for creating a template parser which later is rendered by PHP.
davidhcefx ¶
1 year ago
When the PHP interpreter hits the ?> closing tags, it WON'T output right away if it's inside of a conditional statement:
(no matter if it's an Alternative Syntax or not)
<html>
<?php
$a = 1;
$b = 2;
if ($a === 1) {
if ($b == 2) {
?><head></head><?php
} else {
?><body></body><?php
}
}
?>
</html>
This would output `<html><head></head></html>`.
Aside from conditional statements, the PHP interpreter also skip over functions! What a surprise!
<html>
<?php
function show($a) {
?>
<a href="https://www.<?php echo $a ?>.com">
Link
</a>
<?php
}
?>
<body>
<?php show("google") ?>
</body>
</html>
This gives `<html><body><a href="https://www.google.com">Link</a></body></html>`.
These really confused me, because at first I thought it would output any HTML code right away, except for Alternative Syntaxes (https://www.php.net/manual/en/control-structures.alternative-syntax.php). There are more strange cases than I thought.
Emil Cataranciuc ¶
4 years ago
"<script language="php"> </script>, are always available." since PHP 7.0.0 is no longer true. These are removed along the ASP "<%, %>, <%=" tags.
Anonymous ¶
1 year ago
Since it's not documented (AFAICT) and it might cause confusion: a single line break immediately after ?> is ignored. Since whitespace is hard to see, whitespace is replaced with _ and the following code
<?php echo '1'; ?>
<?php echo '2'; ?>_
<?php echo '3'; ?>
_<?php echo '4'; ?>_<?php echo '5'; ?>
will produce
12_
3_4_5
anisgazig.com ¶
1 year ago
<p>This is ignore by the php parser and displayed by the browser </p>
<?php echo "While this is going to be parsed"; ?>
<?php
when php interpreter hits the closing tag it start to outputing everything whatever it finds until it hit another opening tag.If php interpreter find a conditional statement in the middle of a block then php interpreter decided which block skip
Advanced escaping using conditions
<?php $a = 10; if($a<100): ?>
This conditional block is executed
<?php else: ?>
otherwise this will be executed
<?php endif; ?>
In php 5 version,there are 5 opening and closing tags.
1.<?php echo "standard long form php tag and if you use xml with php this tag will be use";?>
2.<?= "short echo tag and alwayes available from 5.4.0";?>
3.<? echo "short open tag which is available if short_open_tag is enable in php ini configuration file directive or php was configured with --enable-short-tags.This tag has discoursed from php 7.If you want to use xml with php,then short_open_tag in php ini will be disabled";?>
4.<script language="php">
echo "Some editor do not like processing the code within this tag and this tag is removed from php 7.0.0 version";
</script>
5.<% echo "asp style tag and asp_tags should be enabled but now php 7.0.0 version,this tag is removed";%>
admin at furutsuzeru dot net ¶
13 years ago
These methods are just messy. Short-opening tags and ASP-styled tags are not always enabled on servers. The <script language="php"></script> alternative is just out there. You should just use the traditional tag opening:
<?php?>
Coding islands, for example:
<?php
$me = 'Pyornide';
?>
<?=$me;?> is happy.
<?php
$me = strtoupper($me);
?>
<?=$me;?> is happier.
Lead to something along the lines of messy code. Writing your application like this can just prove to be more of an
inconvenience when it comes to maintenance.
If you have to deal chunks of HTML, then consider having a templating system do the job for you. It is a poor idea to rely on the coding islands method as a template system in any way, and for reasons listed above.
bryanrojasq.wordpress.com ¶
4 months ago
Example for a basic implementation of ternary operator to validate and print a class in the layout.
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title><?= $page_title ?></title>
</head>
<body <?= strtolower($page_slug) === 'homepage' ? 'class="page-homepage"' : ''; ?>>
<section>
<h1><?= $page_title ?></h1>
<p>This is a paragraph.</p>
</section>
</body>
</html>
官方地址：https://www.php.net/manual/en/language.basic-syntax.phpmode.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
利用php soap实现web service
PHP获取指定函数定义在哪个文件中及行号
支持php7的性能采集扩展