For those wanting to use stream_socket_client() to connect to a local UNIX socket who can't find documentation on how to do it, here's a (rough) example:
<?php
$sock = stream_socket_client('unix:///full/path/to/my/socket.sock', $errno, $errstr);
fwrite($sock, 'SOME COMMAND'."\r\n");
echo fread($sock, 4096)."\n";
fclose($sock);
?>
PHP - Manual: stream_socket_client
2024-11-14
stream_socket_client
(PHP 5, PHP 7, PHP 8)
stream_socket_client — Open Internet or Unix domain socket connection
说明
stream_socket_client(
string
int
string
?float
int
?resource
): resource|false
string
$address,int
&$error_code = null,string
&$error_message = null,?float
$timeout = null,int
$flags = STREAM_CLIENT_CONNECT,?resource
$context = null): resource|false
Initiates a stream or datagram connection to the destination specified
by address. The type of socket created
is determined by the transport specified using standard URL formatting:
transport://target. For Internet Domain sockets
(AF_INET) such as TCP and UDP, the target portion
of the address parameter should consist of
a hostname or IP address followed by a colon and a port number. For Unix
domain sockets, the target portion should point
to the socket file on the filesystem.
注意:
The stream will by default be opened in blocking mode. You can switch it to non-blocking mode by using stream_set_blocking().
参数
-
address -
Address to the socket to connect to.
-
error_code -
Will be set to the system level error number if connection fails.
-
error_message -
Will be set to the system level error message if the connection fails.
-
timeout -
Number of seconds until the
connect()system call should timeout. By default, default_socket_timeout is used.注意: This parameter only applies when not making asynchronous connection attempts.
注意:
To set a timeout for reading/writing data over the socket, use the stream_set_timeout(), as the
timeoutonly applies while making connecting the socket. -
flags -
Bitmask field which may be set to any combination of connection flags. Currently the select of connection flags is limited to
STREAM_CLIENT_CONNECT(default),STREAM_CLIENT_ASYNC_CONNECTandSTREAM_CLIENT_PERSISTENT. -
context -
A valid context resource created with stream_context_create().
返回值
On success a stream resource is returned which may
be used together with the other file functions (such as
fgets(), fgetss(),
fwrite(), fclose(), and
feof()), false on failure.
错误／异常
On failure the error_code and
error_message arguments will be populated with the actual
system level error that occurred in the system-level
connect() call. If the value returned in
error_code is 0 and the
function returned false, it is an indication that the error
occurred before the connect() call. This is
most likely due to a problem initializing the socket. Note that
the error_code and
error_message arguments will always be passed by
reference.
更新日志
| 版本 | 说明 |
|---|---|
| 8.0.0 |
timeout and context are now nullable.
|
范例
示例 #1 stream_socket_client() example
<?php
$fp = stream_socket_client("tcp://www.example.com:80", $errno, $errstr, 30);
if (!$fp) {
echo "$errstr ($errno)<br />\n";
} else {
fwrite($fp, "GET / HTTP/1.0\r\nHost: www.example.com\r\nAccept: */*\r\n\r\n");
while (!feof($fp)) {
echo fgets($fp, 1024);
}
fclose($fp);
}
?>
示例 #2 Using UDP connection
Retrieving the day and time from the UDP service "daytime" (port 13) on localhost.
<?php
$fp = stream_socket_client("udp://127.0.0.1:13", $errno, $errstr);
if (!$fp) {
echo "ERROR: $errno - $errstr<br />\n";
} else {
fwrite($fp, "\n");
echo fread($fp, 26);
fclose($fp);
}
?>
注释
警告
UDP sockets will sometimes appear to have opened without an error, even if the remote host is unreachable. The error will only become apparent when you read or write data to/from the socket. The reason for this is because UDP is a "connectionless" protocol, which means that the operating system does not try to establish a link for the socket until it actually needs to send or receive data.
注意: 当指定数值型的 IPv6 地址（例如
fe80::1）时必须用方括号将 IP 围起来——例如，tcp://[fe80::1]:80。
注意:
Depending on the environment, the Unix domain or the optional connect timeout may not be available. A list of available transports can be retrieved using stream_get_transports(). See 所支持的套接字传输器（Socket Transports）列表 for a list of built in transports.
参见
- stream_socket_server() - Create an Internet or Unix domain server socket
- stream_set_blocking() - 为资源流设置阻塞或者阻塞模式
- stream_set_timeout() - Set timeout period on a stream
- stream_select() - Runs the equivalent of the select() system call on the given arrays of streams with a timeout specified by seconds and microseconds
- fgets() - 从文件指针中读取一行
- fgetss() - 从文件指针中读取一行并过滤掉 HTML 标记
- fwrite() - 写入文件（可安全用于二进制文件）
- fclose() - 关闭一个已打开的文件指针
- feof() - 测试文件指针是否到了文件结束的位置
- cURL 函数
add a note
User Contributed Notes 6 notes
nicholas at nicholaswilliams dot net ¶
13 years ago
Vasil Rangelov a.k.a. boen_robot ¶
10 years ago
The remote_socket argument, in its end (well... after the port), can also contain a "/" followed by a unique identifier. This is especially useful if you want to create multiple persistent connections to the same transport://host:port combo.
Example:
<?php
$socket = stream_socket_client('tcp://mysql.example.com:3306/root', $errorno, $errorstr, $timeout, STREAM_CLIENT_CONNECT | STREAM_CLIENT_PERSISTENT);
?>
Note that while (p)fsockopen() follows a similar scheme, it doesn't have this particular feature.
wbeaver at afilias dot info ¶
14 years ago
# Some may find it useful to know that your caCert
# must be in pem format, and that PHP seems to like
# your key, cert, and cacert pem's to be concatenated
# in a single file (I suffered various "unknown chain"
# errors, otherwise)
#
# So, (linux users), concat your components as follows:
# (where current working dir is dir where
# cert components are stored)
#
# cat key.pem >certchain.pem
# cat cert.pem >>certchain.pem
# cat cacert.pem >>certchain.pem
#
# Then, the php....
##################################
<?php
$host = 'host.domain.tld';
$port = 1234;
$timeout = 10;
$cert = '/path/to/your/certchain/certchain.pem';
$context = stream_context_create(array('ssl'=>array('local_cert'=> $cert,
)));
if ($fp = stream_socket_client('ssl://'.$host.':'.$port, $errno, $errstr, 30,
STREAM_CLIENT_CONNECT, $context)) {
fwrite($fp, "\n");
echo fread($fp,8192);
fclose($fp);
} else {
echo "ERROR: $errno - $errstr<br />\n";
}
?>
Daniel ¶
7 years ago
If you only need to check a stream for data, you can use stream_get_content and strtr function. stream_get_content
reads the remainder of a stream into a string.
<?php
$addr = gethostbyname('www.example.com');
$client = stream_socket_client("tcp://$addr:80", $errno, $errorMessage);
if($client === false){
throw new UnexpectedValueException("Failed to connect: $errorMessage");
}
fwrite($client, "GET / HTTP/1.0\r\nhost: 'www.example.com'\r\nAccept: */*\r\n\r\n");
$variable = stream_get_content($client);
if(strstr($variable,'data your looking for'))
echo "The data you are looking for is here";
else
echo "data not found";
fclose($client);
?>
robin at gareus dot org ¶
13 years ago
I came here since fsockopen() does not support any SSL certificate checking in PHP5.
while curl is nice, I use stream_socket_client() to make XML-RPC POST requests via HTTPS and since I have not found any PHP code around that does this, I'll attach an example that also includes HTTP-Digest Auth (eg. trac's WikiRPCInterface2):
<?php
#################################################
# $host: hostname ; eg 'example.org'
# $path: request' eg '/index.php?id=123'
# $data_to_send : data to POST after the HTTP header.
#
# if $opts is an empty array() a standard HTTP to port 80 request is performed.
#
# set auth['type']='basic' to use plain-text auth,
# digest-auth will be handled automatically if $auth['username'] is set and a 401
# status is encountered. - use auth['type']='nodigest' to override.
#
##
function httpPost($host, $path, $data_to_send,
$opts=array('cert'=>"", 'headers'=>0, 'transport' =>'ssl', 'port'=>443),
$auth=array('username'=>"", 'password'=>"", 'type'=>"")
) {
$transport=''; $port=80;
if (!empty($opts['transport'])) $transport=$opts['transport'];
if (!empty($opts['port'])) $port=$opts['port'];
$remote=$transport.'://'.$host.':'.$port;
$context = stream_context_create();
$result = stream_context_set_option($context, 'ssl', 'verify_host', true);
if (!empty($opts['cert'])) {
$result = stream_context_set_option($context, 'ssl', 'cafile', $opts['cert']);
$result = stream_context_set_option($context, 'ssl', 'verify_peer', true);
} else {
$result = stream_context_set_option($context, 'ssl', 'allow_self_signed', true);
}
$fp = stream_socket_client($remote, $err, $errstr, 60, STREAM_CLIENT_CONNECT, $context);
if (!$fp) {
trigger_error('httpPost error: '.$errstr);
return NULL;
}
$req='';
$req.="POST $path HTTP/1.1\r\n";
$req.="Host: $host\r\n";
if ($auth['type']=='basic' && !empty($auth['username'])) {
$req.="Authorization: Basic ";
$req.=base64_encode($auth['username'].':'.$auth['password'])."\r\n";
}
elseif ($auth['type']=='digest' && !empty($auth['username'])) {
$req.='Authorization: Digest ';
foreach ($auth as $k => $v) {
if (empty($k) || empty($v)) continue;
if ($k=='password') continue;
$req.=$k.'="'.$v.'", ';
}
$req.="\r\n";
}
$req.="Content-type: text/xml\r\n";
$req.='Content-length: '. strlen($data_to_send) ."\r\n";
$req.="Connection: close\r\n\r\n";
fputs($fp, $req);
fputs($fp, $data_to_send);
while(!feof($fp)) { $res .= fgets($fp, 128); }
fclose($fp);
if ($auth['type']!='nodigest'
&& !empty($auth['username'])
&& $auth['type']!='digest' # prev. digest AUTH failed.
&& preg_match("/^HTTP\/[0-9\.]* 401 /", $res)) {
if (1 == preg_match("/WWW-Authenticate: Digest ([^\n\r]*)\r\n/Us", $res, $matches)) {
foreach (split(",", $matches[1]) as $i) {
$ii=split("=",trim($i),2);
if (!empty($ii[1]) && !empty($ii[0])) {
$auth[$ii[0]]=preg_replace("/^\"/",'', preg_replace("/\"$/",'', $ii[1]));
}
}
$auth['type']='digest';
$auth['uri']='https://'.$host.$path;
$auth['cnonce']=randomNonce();
$auth['nc']=1;
$a1=md5($auth['username'].':'.$auth['realm'].':'.$auth['password']);
$a2=md5('POST'.':'.$auth['uri']);
$auth['response']=md5($a1.':'
.$auth['nonce'].':'.$auth['nc'].':'
.$auth['cnonce'].':'.$auth['qop'].':'.$a2);
return httpPost($host, $path, $data_to_send, $opts, $auth);
}
}
if (1 != preg_match("/^HTTP\/[0-9\.]* ([0-9]{3}) ([^\r\n]*)/", $res, $matches)) {
trigger_error('httpPost: invalid HTTP reply.');
return NULL;
}
if ($matches[1] != '200') {
trigger_error('httpPost: HTTP error: '.$matches[1].' '.$matches[2]);
return NULL;
}
if (!$opts['headers']) {
$res=preg_replace("/^.*\r\n\r\n/Us",'',$res);
}
return $res;
}
?>
bisho at onirica dot com ¶
12 years ago
stream_socket_client is much easier and faster to use to direct sockets, because you can use directly fwrite / fget / fclose functions, but I find hard to find how to connect to a UNIX domain socket. The URL to use is "udg:///path/to/socket".
For example, to log to the log socket (like syslog), you can use:
<?php
$socket = stream_socket_client('udg:///dev/log',
$errorno,
$errorstr,
$timeout);
fwrite($socket, ...);
?>
官方地址：https://www.php.net/manual/en/function.stream-socket-client.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
支持php7的性能采集扩展
adodb连接mysql多个数据库的问题
php $_SERVER中的SERVER_NAME 和HTTP_HOST的区别