snmprealwalk indexes the values using the oid instead of an integer. This is useful when you need data that is contained in the oid as well as the value.
Here's an example for retrieving and printing vlan info:
//
// I have collected the vlan identifiers earlier from the 3com mib and they are stored in the $vlan table.
//
for($n=0;$n<count($vlan);$n++){
print $vlan[$n][id]." ".$vlan[$n][name]."<br>\n";
$ifStackStatusTable=@snmprealwalk($switch, $community, ".1.3.6.1.2.1.31.1.2.1.3.".$vlan[$n][id]); // ifMIB.ifMIBObjects.ifStackTable.ifStackEntry.ifStackStatus
for(reset($ifStackStatusTable); $port = key($ifStackStatusTable); next($ifStackStatusTable)){
print "$port=$ifStackStatusTable[$port]<br>";
}
PHP - Manual: snmprealwalk
2024-11-14
snmprealwalk
(PHP 4, PHP 5, PHP 7, PHP 8)
snmprealwalk — 返回指定的所有对象，包括它们各自的对象 ID
说明
snmprealwalk(
string
string
string
int
int
): array
string
$host,string
$community,string
$object_id,int
$timeout = 1000000,int
$retries = 5): array
The snmprealwalk() function is used to traverse over a number
of SNMP objects starting from object_id
and return not only their values but also their object ids.
参数
-
host -
The hostname of the SNMP agent (server).
-
community -
The read community.
-
object_id -
The SNMP object id which precedes the wanted one.
-
timeout -
The number of microseconds until the first timeout.
-
retries -
The number of times to retry if timeouts occur.
返回值
Returns an associative array of the SNMP object ids and their values on success or false on error.
In case of an error, an E_WARNING message is shown.
范例
示例 #1 Using snmprealwalk()
<?php
print_r(snmprealwalk("localhost", "public", "IF-MIB::ifName"));
?>
The above will output something like:
Array
(
[IF-MIB::ifName.1] => STRING: lo
[IF-MIB::ifName.2] => STRING: eth0
[IF-MIB::ifName.3] => STRING: eth2
[IF-MIB::ifName.4] => STRING: sit0
[IF-MIB::ifName.5] => STRING: sixxs
)
add a note
User Contributed Notes 7 notes
Lars Troen ¶
19 years ago
Anonymous ¶
14 years ago
To check if there were any results found you have to use the empty() function. The count() function always returns a number 1 or larger.
$walk_result = snmprealwalk($machine_ip, $community, $snmpcodes['interface_names']);
if (empty($walk_result)) {
print "No network interfaces found.<br>\n";
exit(0);
}
scot at indievisible dot org ¶
15 years ago
Since PHP doesn't have a nice snmptable-like function... here is a quick-and-dirty hack that works for me. Works on complete and sparse tables. The example oids are for the route (complete) and interface (often sparse) tables.
<?php
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.4.21") or die("error");
print_r($a);
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.2.2") or die("error");
print_r($a);
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid) or die("snmptable: unable to walk OID $oid");
$prefix_length = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
isset($firstrow) or $firstrow = $index[1];
$retval[$index[1]][$index[0]] = $value;
}
// check for holes in the table and fill them in
foreach ($retval[$firstrow] as $key => $tmp) {
foreach($retval as $check => $tmp2) {
if (! isset($retval[$check][$key])) {
$retval[$check][$key] = '';
}
}
}
return($retval);
}
?>
Stephen Cope ¶
17 years ago
Here's a way to find the uptime and number of users on a machine. (Note that uptime is the uptime of the snmpd daemon, which should be fairly close to the uptime for the host.)
<?php
$state = snmprealwalk($host, "public", ".1.3.6.1.2.1.25.1", 50, 1);
$uptime = ereg_replace("^.*\) ([0-9]+ .*):[0-9][0-9]\.[0-9]{2}.*$", "\\1", $state['host.hrSystem.hrSystemUptime.0']);
$users = (int)ereg_replace("Gauge32: ", "", $state['host.hrSystem.hrSystemNumUsers.0']);
printf('<div class="machine"><dt>%s</dt><dd>%s</dd>', $host, $desc);
printf('<dd>up %s</dd>', $uptime);
if ( $users ) printf('<dd>%d user%s</dd>', $users, ($users > 1) ? 's' : '');
printf('</div>');
?>
aleksander dot sztramski at kpsi dot pl ¶
12 years ago
If you wish to use version 2c or 3, use the following functions:
snmp v2c functions:
snmp2_get (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_getnext (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_real_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_set (string host, string community, string object_id, string type, mixed value [, int timeout [, int retries]])
snmp v3 functions:
snmp3_get (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
snmp3_getnext (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string pri)
snmp3_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_p)
snmp3_real_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string p)
snmp3_set (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
railson at amixsi dot com dot br ¶
16 years ago
Attention: timeout is in microseconds (multiply by 1,000,000 for seconds)
scot at indievisible dot org ¶
15 years ago
Some improvements based on testing a lot of OIDs on a lot of devices.
<?php
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid);
if (count($raw) == 0) return ($retval); // no data
$prefix_length = 0;
$largest = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
if ($largest < $index[0]) $largest = $index[0];
$retval[$index[1]][$index[0]] = $value;
}
if (count($retval) == 0) return ($retval); // no data
// fill in holes and blanks the agent may "give" you
foreach($retval as $k => $x) {
for ($i = 1; $i <= $largest; $i++) {
if (! isset($retval[$k][$i])) {
$retval[$k][$i] = '';
}
}
ksort($retval[$k]);
}
return($retval);
}
?>
官方地址：https://www.php.net/manual/en/function.snmprealwalk.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
支持php7的性能采集扩展
adodb连接mysql多个数据库的问题
php $_SERVER中的SERVER_NAME 和HTTP_HOST的区别