As ord() doesn't work with utf-8, and if you do not have access to mb_* functions, the following function will work well:
<?php
function ordutf8($string, &$offset) {
$code = ord(substr($string, $offset,1));
if ($code >= 128) { //otherwise 0xxxxxxx
if ($code < 224) $bytesnumber = 2; //110xxxxx
else if ($code < 240) $bytesnumber = 3; //1110xxxx
else if ($code < 248) $bytesnumber = 4; //11110xxx
$codetemp = $code - 192 - ($bytesnumber > 2 ? 32 : 0) - ($bytesnumber > 3 ? 16 : 0);
for ($i = 2; $i <= $bytesnumber; $i++) {
$offset ++;
$code2 = ord(substr($string, $offset, 1)) - 128; //10xxxxxx
$codetemp = $codetemp*64 + $code2;
}
$code = $codetemp;
}
$offset += 1;
if ($offset >= strlen($string)) $offset = -1;
return $code;
}
?>
$offset is a reference, as it is not easy to split a utf-8 char-by-char. Useful to iterate on a string:
<?php
$text = "abcàê߀abc";
$offset = 0;
while ($offset >= 0) {
echo $offset.": ".ordutf8($text, $offset)."\n";
}
/* returns:
0: 97
1: 98
2: 99
3: 224
5: 234
7: 223
9: 8364
12: 97
13: 98
14: 99
*/
?>
Feel free to adapt my code to fit your needs.
PHP - Manual: ord
2024-11-15
ord
(PHP 4, PHP 5, PHP 7, PHP 8)
ord — 转换字符串第一个字节为 0-255 之间的值
说明
ord(string
$string): int
解析 string 二进制值第一个字节为 0 到 255 范围的无符号整型类型。
如果字符串是 ASCII、 ISO-8859、Windows 1252之类单字节编码，就等于返回该字符在字符集编码表中的位置。 但请注意，本函数不会去检测字符串的编码，尤其是不会识别类似 UTF-8 或 UTF-16 这种多字节字符的 Unicode 代码点（code point）。
该函数是 chr() 的互补函数。
参数
-
string -
一个字符。
返回值
返回 0 - 255 的整型值。
范例
示例 #1 ord() 范例
<?php
$str = "\n";
if (ord($str) == 10) {
echo "The first character of \$str is a line feed.\n";
}
?>
示例 #2 检查 UTF-8 字符串的每一个字节
<?php
declare(encoding='UTF-8');
$str = "🐘";
for ( $pos=0; $pos < strlen($str); $pos ++ ) {
$byte = substr($str, $pos);
echo 'Byte ' . $pos . ' of $str has value ' . ord($byte) . PHP_EOL;
}
?>
以上例程会输出：
Byte 0 of $str has value 240
Byte 1 of $str has value 159
Byte 2 of $str has value 144
Byte 3 of $str has value 152
add a note
User Contributed Notes 6 notes
arglanir+phpnet at gmail dot com ¶
9 years ago
paco at olecode dot com ¶
2 years ago
this function convert UTF-8 string to RTF code string. I am using code of v0rbiz at yahoo dot com, thanks!!!
function cadena_rtf($txt)
{
$result = null;
for ($pos = 0; $pos < mb_strlen($txt); $pos++) {
$char = mb_substr($txt, $pos, 1);
if (!preg_match("/[A-Za-z1-9,.]/", $char)) {
//unicode ord real!!!
$k = mb_convert_encoding($char, 'UCS-2LE', 'UTF-8');
$k1 = ord(substr($k, 0, 1));
$k2 = ord(substr($k, 1, 1));
$ord = $k2 * 256 + $k1;
if ($ord > 255) {
$result .= '\uc1\u' . $ord . '*';
} elseif ($ord > 32768) {
$result .= '\uc1\u' . ($ord - 65535) . '*';
} else {
$result .= "\\'" . dechex($ord);
}
} else {
$result .= $char;
}
}
return $result;
}
rowan dot collins at cwtdigital dot com ¶
9 years ago
Regarding character sets, and whether or not this is "ASCII". Firstly, there is no such thing as "8-bit ASCII", so if it were ASCII it would only ever return integers up to 127. 8-bit ASCII-compatible encodings include the ISO 8859 family of encodings, which map various common characters to the values from 128 to 255. UTF-8 is also designed so that characters representable in 7-bit ASCII are coded the same; byte values higher than 127 in a UTF-8 string represent the beginning of a multi-byte character.
In fact, like most of PHP's string functions, this function isn't doing anything to do with character encoding at all - it is just interpreting a binary byte from a string as an unsigned integer. That is, ord(chr(200)) will always return 200, but what character chr(200) *means* will vary depending on what character encoding it is *interpreted* as part of (e.g. during display).
A technically correct description would be "Returns an integer representation of the first byte of a string, from 0 to 255. For single-byte encodings such as (7-bit) ASCII and the ISO 8859 family, this will correspond to the first character, and will be the position of that character in the encoding's mapping table. For multi-byte encodings, such as UTF-8 or UTF-16, the byte may not represent a complete character."
The link to asciitable.com should also be replaced by one which explains what character encoding it is displaying, as "Extended ASCII" is an ambiguous and misleading name.
v0rbiz at yahoo dot com ¶
18 years ago
I did not found a unicode/multibyte capable 'ord' function, so...
<?php
function uniord($u) {
$k = mb_convert_encoding($u, 'UCS-2LE', 'UTF-8');
$k1 = ord(substr($k, 0, 1));
$k2 = ord(substr($k, 1, 1));
return $k2 * 256 + $k1;
}
?>
Noname ¶
5 months ago
<?php
declare (encoding='UTF-8');
$animalsstr = '🐀🐁🐂🐃🐄🐅🐆🐇🐈🐉🐊🐋🐌🐍🐎🐏🐐🐑🐒🐓🐔🐕🐖🐗🐘🐙'
. '🐚🐛🐜🐝🐞🐟🐠🐡🐢🐣🐤🐥🐦🐧🐨🐩🐪🐫🐬🐭🐮🐯🐰🐱🐲🐳🐴🐵'
. '🐶🐷🐸🐹🐺🐻🐼🐽🐾🐿';
$animals = mb_str_split($animalsstr);
foreach ($animals as $animal) {
for ($pos = 0; $pos < strlen($animal); $pos++) {
$byte = substr($animal, $pos);
echo "Byte $pos of $animal has value " . ord($byte) . PHP_EOL;
}
}
?>
Anonymous ¶
10 months ago
For anyone who's looking to convert full strings to map and back it's pretty simple but takes some getting used to...the code below saves an hour of scrounging codes for beginners like myself.
function var2map($a) {
$b='';
$c=strlen($a);
for($i=0; $i<$c; ++$i) {
$d=ord(substr($a,$i,1));
if($d<10) {
$e='00'.$d;
} else {
if($d<100) {
$e='0'.$d;
} else {
$e=$d;
}
}
if($b=='') {
$b=$e;
} else {
$b=$b.$e;
}
}
return $b;
}
function map2var($a) {
$b='';
$c=strlen($a) / 3;
for($i=0; $i<$c; ++$i) {
$d=chr(substr($a,$i*3,3));
if($b=='') {
$b=$d;
} else {
$b=$b.$d;
}
}
return $b;
}
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
php中几种注释规范
PHP获取指定函数定义在哪个文件中及行号
支持php7的性能采集扩展