PHP - Manual: msg_receive

2024-11-14

msg_receive

(PHP 4 >= 4.3.0, PHP 5, PHP 7, PHP 8)

msg_receive — Receive a message from a message queue

说明

msg_receive(
    SysvMessageQueue $queue,
    int $desired_message_type,
    int &$received_message_type,
    int $max_message_size,
    mixed &$message,
    bool $unserialize = true,
    int $flags = 0,
    int &$error_code = null
): bool

msg_receive() will receive the first message from the specified queue of the type specified by desired_message_type.

参数

queue

The message queue.

desired_message_type

If desired_message_type is 0, the message from the front of the queue is returned. If desired_message_type is greater than 0, then the first message of that type is returned. If desired_message_type is less than 0, the first message on the queue with a type less than or equal to the absolute value of desired_message_type will be read. If no messages match the criteria, your script will wait until a suitable message arrives on the queue. You can prevent the script from blocking by specifying MSG_IPC_NOWAIT in the flags parameter.

received_message_type

The type of the message that was received will be stored in this parameter.

max_message_size

The maximum size of message to be accepted is specified by the max_message_size; if the message in the queue is larger than this size the function will fail (unless you set flags as described below).

message

The received message will be stored in message, unless there were errors receiving the message.

unserialize

If set to true, the message is treated as though it was serialized using the same mechanism as the session module. The message will be unserialized and then returned to your script. This allows you to easily receive arrays or complex object structures from other PHP scripts, or if you are using the WDDX serializer, from any WDDX compatible source.

If unserialize is false, the message will be returned as a binary-safe string.

flags

The optional flags allows you to pass flags to the low-level msgrcv system call. It defaults to 0, but you may specify one or more of the following values (by adding or ORing them together).

**Flag values for msg_receive**
`MSG_IPC_NOWAIT`	If there are no messages of the `desired_message_type`, return immediately and do not wait. The function will fail and return an integer value corresponding to `MSG_ENOMSG`.
`MSG_EXCEPT`	Using this flag in combination with a `desired_message_type` greater than 0 will cause the function to receive the first message that is not equal to `desired_message_type`.
`MSG_NOERROR`	If the message is longer than `max_message_size`, setting this flag will truncate the message to `max_message_size` and will not signal an error.

error_code

If the function fails, the optional error_code will be set to the value of the system errno variable.

返回值

成功时返回 true，或者在失败时返回 false。

Upon successful completion the message queue data structure is updated as follows: msg_lrpid is set to the process-ID of the calling process, msg_qnum is decremented by 1 and msg_rtime is set to the current time.

更新日志

版本	说明
8.0.0	`queue` expects a SysvMessageQueue instance now; previously, a resource was expected.

参见

msg_remove_queue() - Destroy a message queue
msg_send() - Send a message to a message queue
msg_stat_queue() - Returns information from the message queue data structure
msg_set_queue() - Set information in the message queue data structure

add a note

User Contributed Notes 5 notes

down

marbledore at mail dot ru ¶

11 years ago


It looks like msg_receive() allocates a memory with size $maxsize, and only then tries to receive a message from queue into allocated memory. Because my script dies with $maxsize = 1 Gib, but works with $maxsize = 10 Kib.

down

webmaster at toolshed51 dot com ¶

19 years ago


This is meant to be run as your apache user in a terminal, call script in note of msg_send and they will communicate.

#! /usr/bin/env php
<?php
    $MSGKEY = 519051; // Message

    $msg_id = msg_get_queue ($MSGKEY, 0600);

    while (1) {
        if (msg_receive ($msg_id, 1, $msg_type, 16384, $msg, true, 0, $msg_error)) {
            if ($msg == 'Quit') break;
            echo "$msg\n";
        } else {
            echo "Received $msg_error fetching message\n";
            break;
        }
    }

    msg_remove_queue ($msg_id);
?>

down

soger ¶

3 years ago


It seems that a maxsize of 2Mb is some sort of a threshold for php, above that msg_receive() starts to use a lot of CPU (with a sender that is pushing messages non-stop receiving 10000 messages jumps up from 0.01 sec to 1.5 sec on my computer) so try to stay below that thresholod if you can.

down

marvel at post dot cz ¶

14 years ago


Consider this e.g. Linux situation:


<?php

//file send.php

$ip = msg_get_queue(12340);

msg_send($ip,8,"abcd",false,false,$err);

//-----------------------------------------------------

<?php

//file receive.php

$ip = msg_get_queue(12340);


msg_receive($ip,0,$msgtype,4,$data,false,null,$err);

echo "msgtype {$msgtype} data {$data}\n";


msg_receive($ip,0,$msgtype,4,$data,false,null,$err);

echo "msgtype {$msgtype} data {$data}\n";

?>



Now run: 

in terminal #1   php5 receive.php

in terminal #2   php5 receive.php

in terminal #3   php5 send.php


Showing messages from queue will flip-flop. It means you run once send.php, the message will be shown in terminal #1. Second run it will be in t#2, third #1 and so on.

down

-1

eimers at mehrkanal dot com ¶

14 years ago


<?php error_reporting(E_ALL);
/**
 * Example for sending and receiving Messages via the System V Message Queue
 *
 * To try this script run it synchron/asynchron twice times. One time with ?typ=send and one time with ?typ=receive
 *
 * @author          Thomas Eimers - Mehrkanal GmbH
 *
 * This document is distributed in the hope that it will be useful, but without any warranty;
 * without even the implied warranty of merchantability or fitness for a particular purpose.
 */

header('Content-Type: text/plain; charset=ISO-8859-1');
echo "Start...\n";

// Create System V Message Queue. Integer value is the number of the Queue
$queue = msg_get_queue(100379);

// Sendoptions
$message='nachricht';     // Transfering Data
$serialize_needed=false;  // Must the transfer data be serialized ?
$block_send=false;        // Block if Message could not be send (Queue full...) (true/false)
$msgtype_send=1;          // Any Integer above 0. It signeds every Message. So you could handle multible message
                          // type in one Queue.

// Receiveoptions
$msgtype_receive=1;       // Whiche type of Message we want to receive ? (Here, the type is the same as the type we send,
                          // but if you set this to 0 you receive the next Message in the Queue with any type.
$maxsize=100;             // How long is the maximal data you like to receive.
$option_receive=MSG_IPC_NOWAIT; // If there are no messages of the wanted type in the Queue continue without wating.
                          // If is set to NULL wait for a Message.

// Send or receive 20 Messages
for ($i=0;$i<20;$i++) {
  sleep(1);
  // This one sends
  if ($_GET['typ']=='send') {
    if(msg_send($queue,$msgtype_send, $message,$serialize_needed, $block_send,$err)===true) {
      echo "Message sendet.\n";
    } else {
      var_dump($err);
    }
  // This one received
  } else {
    $queue_status=msg_stat_queue($queue);
    echo 'Messages in the queue: '.$queue_status['msg_qnum']."\n";

    // WARNUNG: nur weil vor einer Zeile Code noch Nachrichten in der Queue waren, muss das jetzt nciht mehr der Fall sein!
    if ($queue_status['msg_qnum']>0) {
      if (msg_receive($queue,$msgtype_receive ,$msgtype_erhalten,$maxsize,$daten,$serialize_needed, $option_receive, $err)===true) {
              echo "Received data".$daten."\n";
      } else {
              var_dump($err);
      }
    }
  }
}

?>

add a note

官方地址：https://www.php.net/manual/en/function.msg-receive.php

有任何技术问题请点击这里网站运营推广招聘

IT PHP 编程语言 Linux 开发编程科技 Elasticsearch HTML/CSS/XML 网络 JAVA NoSQL 数据库面试 C/C++ Golang Git 算法操作系统正则表达式 Redis 互联网 MySql JavaScript 运维软件国际架构设计 Mac OS TCP/IP Excel Vim Windows Socket Oracle VR MongoDB Python 运营 MemCache 商业硬件电子娱乐设计 nginx 摄影游戏 WordPress HTTP 团建数码电器

php7 安装fileinfo扩展 preg_split — 通过一个正则表达式分隔字符串 php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题 [PHP] inet_pton/inet_ntop IP地址转换函数 array_multisort() 多字段排序 PHPMailer设置utf8 PHPMailer字符集CharSet ADORecordSet对象 adodb手册 PHP 8.1 [鸟哥]PHP_INT_MIN 和 -9223372036854775808 opcache预加载 Composer的Packagist资源 mysql面试题 [鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式 PHP7添加redis扩展 PHP mkdir()写出来的权限与mode值不符合 Packagist / Composer 中国全量镜像利用php soap实现web service PHP获取指定函数定义在哪个文件中及行号支持php7的性能采集扩展

略微加速

PHP官方手册 - 互联网笔记

msg_receive

说明

参数

返回值

更新日志

参见

User Contributed Notes 5 notes