略微加速

PHP官方手册 - 互联网笔记

PHP - Manual: ldap_search

2024-11-12

add a noteadd a note

User Contributed Notes 34 notes

up
17
jayleno at yahoo dot com
9 years ago
<?php
set_time_limit(30);
error_reporting(E_ALL);
ini_set('error_reporting', E_ALL);
ini_set('display_errors',1);

// config
$ldapserver = 'svr.domain.com';
$ldapuser      = 'administrator'; 
$ldappass     = 'PASSWORD_HERE';
$ldaptree    = "OU=SBSUsers,OU=Users,OU=MyBusiness,DC=myDomain,DC=local";

// connect
$ldapconn = ldap_connect($ldapserver) or die("Could not connect to LDAP server.");

if($ldapconn) {
    // binding to ldap server
    $ldapbind = ldap_bind($ldapconn, $ldapuser, $ldappass) or die ("Error trying to bind: ".ldap_error($ldapconn));
    // verify binding
    if ($ldapbind) {
        echo "LDAP bind successful...<br /><br />";
       
       
        $result = ldap_search($ldapconn,$ldaptree, "(cn=*)") or die ("Error in search query: ".ldap_error($ldapconn));
        $data = ldap_get_entries($ldapconn, $result);
       
        // SHOW ALL DATA
        echo '<h1>Dump all data</h1><pre>';
        print_r($data);   
        echo '</pre>';
       
       
        // iterate over array and print data for each entry
        echo '<h1>Show me the users</h1>';
        for ($i=0; $i<$data["count"]; $i++) {
            //echo "dn is: ". $data[$i]["dn"] ."<br />";
            echo "User: ". $data[$i]["cn"][0] ."<br />";
            if(isset($data[$i]["mail"][0])) {
                echo "Email: ". $data[$i]["mail"][0] ."<br /><br />";
            } else {
                echo "Email: None<br /><br />";
            }
        }
        // print number of entries found
        echo "Number of entries found: " . ldap_count_entries($ldapconn, $result);
    } else {
        echo "LDAP bind failed...";
    }

}

// all done? clean up
ldap_close($ldapconn);
?>
up
8
nick dot veitch at futurenet dot co dot
19 years ago
It might be useful to list here the operators that work:

=         - matches exact value
=*xxx  - matches values ending xxx
=xxx*  - matches values beginning xxx
=*xxx* - matches values containing xxx
=*       - matches all values (if set - NULLS are not returned)

>=xxx  - matches everthing from xxx to end of directory
<=xxx  - matches everything up to xxx in directory

~=xxx      - matches similar entries (not all systems)

Boolean operators for constructing complex search

&(term1)(term2)  - matches term1 AND term2
| (term1)(term2)  - matches term1 OR term2
!(term1)                 - matches NOT term1
&(|(term1)(term2))(!(&(term1)(term2)) - matches XOR term1 term2

some of the more compelx constructions seem to work with varying  degrees of efficiency - sometimes it can be better to filter some of the results with the search and do further filtering in PHP.
up
6
aa529 at nospamchebucto dot ns dot ca
22 years ago
Be careful of special characters when generating filters from user input.

*, (, ), \ and NUL should be backslash-escaped. See section 4 of RFC 2254 (I found it here:
http://www.cis.ohio-state.edu/htbin/rfc/rfc2254.html)
up
10
chrisbloom7 at gmail dot com
14 years ago
Here are a couple of resources for proper construction of filters.

http://msdn2.microsoft.com/En-US/library/aa746475.aspx

http://technet.microsoft.com/en-us/library/aa996205.aspx

Before finding these I had been stumped for hours on how to do something like "all users starting with "a" except those from OU 'foo'"
up
4
john_taylor_1973 at yahoo dot com
19 years ago
Try to use ldap_list(), if possible.  It is much faster.  ldap_search searches a scope of LDAP_SCOPE_SUBTREE, but ldap_list searches a scope of just LDAP_SCOPE_ONELEVEL.  This made a big difference on Novell eDirectory 8.6.1, even for a query that only returned 130 objects.  Using an attribute list, the 4th function parameter (of either function), also made queries faster.
up
3
francis dot tyers at hp dot com
18 years ago
it seems that all fields must be used in lower case even if they are mixed case in the ldapsearch output.

example:

gidNumber: 1010
homeDirectory: /home/dnt

must be:

echo "gid: " . $info[$i]["gidnumber"][0] . "<br>";
echo "home directory: ". $info[$i]["homedirectory"][0] ."<br>";

not ( $info[$i]["homeDirectory"][0] ) etc.
up
3
Arnold
11 years ago
I have been working on a script where I needed to get all the users who were member of a specific MS AD group. Because of PHP bug #42060 ( http://bugs.php.net/bug.php?id=42060 ) I could not get all the users back who were member of the group.
After googling for a day I found an article and a patch but it required that I downloaded the source code for php 5.1.6 or 5.2.10 run the patch and than recompile the code to fix the problem.
Problem was
1) I am not a Linux goeroe so I was not very comfortable doing this....
2) I am running the script on a production machine with other code using PHP and did not know what the consequence would bee for that code.
3) I could not update PHP anymore because in newer versions this patch would probably not work any more.

But yesterday I saw the light and wrote some code to get around this problem, maybe other people can use it that have the same problem.

<?PHP
$startFilter        = "(&(memberOf=" .$ADGroup. "))";
$startResults        = ldap_search($ldapconnect, $userBase, $startFilter, $attr);
$countResult        = ldap_count_entries($ldapconnect,$startResults);

IF($countResult == 1000 OR $countResult == 1500)
{
    // loop trough the number 97-122 (ASCII number for the characters a-z)
    For($a=97;$a<=122;$a++)
    {
        // translate the number to a character
        $character            = chr($a);
        // the new search filter withs returns all users with a last name starting with $character
        $filter            = "(&(sn=$character*)(memberOf=$ADGroup))";
        $results        = ldap_search($ldapconnect, $userBase, $filter, $attr);
        $countResult2    = ldap_count_entries($ldapconnect,$results);
           
        // See if the search for all users starting with a specific character still hits the search limit
        // if so than do a new search to find all the users where the last name starts with "aa" and
        // than with "ab", "ac" etc. etc
        // In the best case we can now find 675.324 users per group when the search limit is 1000
        // ((26 * 999  for the fist character) * 26 for the second character)
        // and 1.013.324 when the search limit is 1500
        If($countResult2 == 1000 or $countResult2 == 1500)
        {
            For($b=97;$b<=122;$b++)
            {
                $character2    = chr($b);
                $filter2    = "(&(sn=$character$character2*)(memberOf=$ADGroup))";
                $results2    = ldap_search($ldapconnect, $userBase, $filter2, $attr);
                $count2        = ldap_count_entries($ldapconnect,$results2);   
                $entries2    = ldap_get_entries($ldapconnect,$results2);                       
               
                // do your thing
            }
        }
        Else
        {
            $entries            = ldap_get_entries($ldapconnect,$results);
            // do your thing
        }
    }
}
else
{
    $entries            = ldap_get_entries($ldapconnect,$startResults);
    // do your thing
}
?>
up
1
cdaveb at csua dot berkeley dot edu
21 years ago
FYI, for those doing LDAP searches on Exchange servers, there seems to be some preference in Exchange to disallow searches that aren't initial searches (i.e. only x* will work, not * or *x). I'd been going nuts trying to figure out why I kept getting errors doing * searches.

More info at:
http://www.microsoft.com/Exchange/en/55/help/documents/server/XOG16007.HTM
up
2
cruzfern at chuchuwa dot com dot ar
16 years ago
The internal attributes (like createTimestamp, modifyTimestamp, etc), don't come by default (when the optional parameter attributes is not set). You have to specify it:

<?
$r=ldap_search($ds,$base,$filter,array("createTimestamp"));
?>
up
4
Jean-Loup
10 years ago
Example of parallel search :

<?php
$basedn=array('dmdName=users,dc=foo,dc=fr','dmdName=users,dc=bar,dc=com');  // two basedn
$filter='(&(objectClass=inetOrgPerson)(uid=*))';  // single filter
$attributes=array('dn','uid','sn');

$cnx = ldap_connect('localhost',389); // single connection
ldap_set_option($cnx, LDAP_OPT_PROTOCOL_VERSION, 3);

ldap_bind($cnx,'uid=root,dc=foo,dc=fr','password');  // authentication on two BDB
ldap_bind($cnx,'uid=root,dc=bar,dc=com','password');

$search = ldap_search(array($cnx,$cnx),$basedn,$filter,$attributes);  // search

// result
for($i=0;$i<count($search);$i++){
    print_r(ldap_get_entries($cnx,$search[$i]));
    print "\n";
}
?>
up
2
sembiance at cosmicrealms dot com
18 years ago
When searching for BINARY data (such as an Active Directory objectGUID) you need to escape each hexadecimal character with a backslash.

The following command line run of ldapsearch shows:
ldapsearch -b "dc=blahblah,dc=com" "(objectGUID=\AE\C3\23\35\F7)"

In PHP, you need to escape the escape for the backslash:
ldap_search($ds,"dc=blahblah,dc=com", "(objectGUID=\\AE\\C3\\23\\35\\F7)");
up
1
jpdalbec at ysu dot edu
19 years ago
I've found that spaces need to be escaped in search filters ("\20"), at least using the Red Hat PHP 4.1.2 package.  Otherwise no results are returned.
up
2
sema at technion dot ac dot il
17 years ago
In order to perform the searches on Windows 2003 Server Active Directory you have to set the LDAP_OPT_REFERRALS option to 0:

ldap_set_option($ldap, LDAP_OPT_REFERRALS, 0);

Without this, you will get "Operations error" if you try to search the whole AD schema (using root of the domain as a $base_dn).

As opposed to Windows 2000 Server, where this option was optional and only increased the performance.
up
1
chester at the dot underground dot com dot au
18 years ago
If you are searching active directory and are experiencing lag or time outs, it may be that you are being given ldap referrals from the ldap server. The following code will disable this.

<?
ldap_set_option($connect, LDAP_OPT_REFERRALS, 0);
?>
up
2
steven_bauman at outlook dot com
2 years ago
Can an example using the new $serverctrls parameter please be added? I have no idea how to use this.
up
1
me at gavinadams dot org
18 years ago
Minor clarification on AD LDAP searchs. Small typo in previous example, and does not display multiple values per attribute. Here's the for loop to enumerate all entries, attributes, and values:

$bind = ldap_bind($connect) // asume anon connect or add user/pass
     or exit(">>Could not bind to $ldap_host<<");
$read = ldap_search($connect, $base_dn, $filter)
     or exit(">>Unable to search ldap server<<");
$info = ldap_get_entries($connect, $read);
echo $info["count"]." entries returned<br>";
// $i = entries
// $ii = attributes for entry
// $iii = values per attribute
for ($i = 0; $i<$info["count"]; $i++) {
  for ($ii=0; $ii<$info[$i]["count"]; $ii++){
     $data = $info[$i][$ii];
     for ($iii=0; $iii<$info[$i][$data]["count"]; $iii++) {
       echo $data.":&nbsp;&nbsp;".$info[$i][$data][$iii]."<br>";
     }
  }
echo "<p>"; // separate entries
up
1
peter dot mlich at volny dot cz
2 years ago
Example code from my ldap class.

public function query($_filter, $_att, $_ref=2, $count_bool=true)
    {
    $fn     = 'query';
    $config = $this->config;
    $conn   = $this->conn;
    if (!$conn)
        {return $this->errorConnection($fn);}
    ldap_set_option($conn, LDAP_OPT_DEREF, $_ref);   
    $result = ldap_search($conn, $config['baseDn'], $_filter, $_att);    //  or die(ldap_error($conn))
    if ($result===false)
        {
        $this->error("Search error, neexistuje!");
        return false;
        }
    $count = ldap_count_entries($conn, $result);
    if ($count_bool && $count!=1)
        {
        $this->error("Search error, neni unikatni! count=".$count);
        ldap_free_result($result);
        return false;
        }
    $data = ldap_get_entries($conn, $result);
    ldap_free_result($result);
    return $data;
    }

// ---

    $filter = "(&(objectclass=person)(cn=" . $user_name . "))";
    $att    = array(
        'uid',
        'workforceID',
        'employeeID',
        'givenName',
        'sn',
        'mail'
        );
    $data   = $this->query($filter, $att, 2, true);
up
1
mike at remi-designs dot net
6 years ago
I ran into the problem, that the attribute I was search for had the matching rule of "exactMatch".

Example:
E-Mail Address is stored in mixed case: John.Doe@example.com

LDAP Search will not retrieve any values when the user enters: john.doe@example.com

Solution: instead of comparing user input and attribute value by

<?php
if($data[$i]['mail'][0] == $username) {
    // this will run into nothing
}
?>

use strcasecmp instead:

<?php
if(strcasecmp($data[$i]['mail'][0], $username) == 0) {
    // works
}
up
0
anze dot pratnemer at fe dot uni-lj dot si
3 years ago
While developing a plugin, I had to search users on LDAP server using ldap_search() command and it was not finding them, but ldapsearch command in unix shell (ubuntu) did.

Problem was few lines above in my code, around ldap_connect(). For server address I input ldap://server.hostname, which turned to be the culprit.

Once I used only server.hostname, without protocol (ldap://), users where found and shown correctly.
up
0
ben _at_ onshop.co.uk
12 years ago
Following from my note of 11-Nov-2009 06:56 regarding DN issues when using LDAP instead of the Global Catalog when querying AD, further investigation was showing that although the results were in the packet, I was getting an error instead:

'Search: Can't contact LDAP server' AKA Error 81.

Using more detailed analysis:

ldap_get_option($ds,LDAP_OPT_ERROR_STRING,$error);

echo $error

Displayed:

Referral: ldap://DomainDnsZones.defg.de.bc.ac.uk/ DC=DomainDnsZonesDC=defg,DC=de,DC=abc,DC=ac,DC=uk

By using trial and error, the error went away and results returned when using:

ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3);
up
0
Allie
15 years ago
I just posted on the ldap_bind, but I figured it couldn't hurt here since this was the first place I stopped when trying to figure out my problem.  My error pointed to ldap_search, but specifying the ldap_connect port was the fix.

When you want to search the entire directory for MS AD, you must specify port 3268 in your bind.  This is also true for apache auth_ldap.

$ldapserver = ldap_connect($server,3268);
up
0
nicolas at atanis dot net
18 years ago
Here is a little script that make a complete subtree search ( i know a script above seems do that but it doesnt work fine)
This is my version:

Voila ce que j'ai fait aujourd'hui ...

      $ldap_host = "192.168.0.50";
    $ldap_port = "389";
    $base_dn = "dc=fr";
    $filter = "(cn=*)";
    $ldap_user ="cn=admin,dc=fr";
    $ldap_pass = "hellodelu";
    $connect = ldap_connect( $ldap_host, $ldap_port);
    ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);

    $bind = ldap_bind($connect, $ldap_user, $ldap_pass);
    $read = ldap_search($connect, $base_dn, $filter);
   
    $info = ldap_get_entries($connect, $read);
    echo $info["count"]." entrees retournees<BR><BR>";
    for($ligne = 0; $ligne<$info["count"]; $ligne++)
    {
        for($colonne = 0; $colonne<$info[$ligne]["count"]; $colonne++)
        {
            $data = $info[$ligne][$colonne];
            echo $data.":".$info[$ligne][$data][0]."<BR>";
        }
        echo "<BR>";
    }
ldap_close($connect);

--------
nicolas
up
0
Anonymous
20 years ago
I used the following to retrieve all entries from an ILS (Netmeeting) Server:<p>    $sr=ldap_search($ds, "objectclass=rtperson","(&(cn=%)(objectclass=rtperson))");
<p>Have fun!
<p>Kees
up
-1
php @ fccfurn dot com
19 years ago
To do subtree search from top DN in Active Directory, Make sure you do your ldap_set_option().

<?php
$ldap_host = "pdc.php.net";
$base_dn = "DC=php,DC=net";
$filter = "(cn=Joe User)";
$ldap_user  = "CN=Joe User,OU=Sales,DC=php,DC=net";
$ldap_pass = "pass";
$connect = ldap_connect( $ldap_host, $ldap_port)
         or exit(">>Could not connect to LDAP server<<");
ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);
ldap_set_option($connect, LDAP_OPT_REFERRALS, 0);
$bind = ldap_bind($connect, $ldap_user, $ldap_pass)
      or exit(">>Could not bind to $ldap_host<<");
$read = ldap_search($connect, $base_dn, $filter)
      or exit(">>Unable to search ldap server<<");
$info = ldap_get_entries($connect, $read);
echo $info["count"]." entries returned<p>";
$ii=0;
for ($i=0; $ii<$info[$i]["count"]; $ii++){
    $data = $info[$i][$ii];
    echo $data.":&nbsp;&nbsp;".$info[$i][$data][0]."<br>";
}
ldap_close($connect);
?>
up
-1
ben _at_ onshop_co_uk
12 years ago
Example to illustrate searching more than one DN (multiple DNs):

<?php
$ds=ldap_connect($ldapserver);

$dn[]='OU=ABC,DC=xyz,DC=ac,DC=uk';
$dn[]='OU=DEF,DC=xyz,DC=ac,DC=uk';

$id[] = $ds;
$id[] = $ds;

$filter = 'samaccountname='.$_POST['username'];

$result = ldap_search($id,$dn,$filter);

$search = false;

foreach ($result as $value) {
    if(ldap_count_entries($ds,$value)>0){
        $search = $value;
        break;
    }
}

if($search){
    $info = ldap_get_entries($ds, $search);
}else{
    $info = 'No results found';
}
?>
up
-3
info at acpower dot biz
10 years ago
I'm a newbie, so I hope this helps some other newbie with a head scratcher...

This code returned an error of 'No Such Object':

<?php

    $search = ldap_search ($ldapcon, "cn=admin,dc=acpower,dc=biz", "(filters)");

?>

I took out the cn, and magic! it works:

<?php

    $search = ldap_search ($ldapcon, "dc=acpower,dc=biz", "(filters)");

?>
up
-2
openldap at mail dot doris dot cc
17 years ago
PHP 4.3.10

I was trying to do an ldapsearch without a basedn.  First, I tried with ' ', as suggested above, but it gave me invalid dn syntax error.

ie:
$sr=ldap_search($ds, ' ', $filter);
Warning: ldap_search(): Search: Invalid DN syntax in ...

Then I changed it to
$sr=ldap_search($ds, "", $filter);

Which gave me the following error:
Warning: ldap_search(): Search: No such object in ...

With that I then modified my ldap.conf file and commented out the BASE field
#BASE   dc=example, dc=com

Then it worked!

So it looks like if you supply a blank basedn, then it will use your default basedn in ldap.conf.
up
-1
emrecio at netscape dot net
19 years ago
implode(", ",$uentry[0]["rfc822mailalias"]);

doesn't work as expected because "count" is in there... one /must/ use the 'for' loop to cycle through results (discarding "count" element).
up
-2
fmouse at fmp dot com
17 years ago
It appears that the Netscape Directory SDK (developer.netscape.com) referenced for LDAP filter information is no longer accepting connections.   The A copy of RFC 2254 which defines the standard for string representations of LDAP filters can be found  at http://www.ietf.org/rfc/rfc2254.txt
up
-2
Kamil Kukura <kamk at nexen dot cz>
19 years ago
When I tried to search with empty base DN on OpenLDAP server which had "" namingContext I got result "no such object". In the log file there was query for dn: dc=example,dc=com (!).
As a workaround, it seems it's enough to feed it with space (' ') as base DN - ldap_search($ds, ' ', '(...filter...)', ...
up
-2
neumeyed at city dot bloomington dot in dot us
19 years ago
A previous comment noted: "I've also noticed that the departmentNumber, employeeNumber (and maybe others in inetorgperson.schema) are not returned from a search."

This is incorrect. These attributes are returned, but you must reference them with lowercase names. That is, instead of doing this:

$entries[0]["departmentNumber"][0]

Do this:

$entries[0]["departmentnumber"][0]

This doesn't seem like "correct" behavior to me, but I don't know enough about LDAP to say for sure.
up
-3
nick
10 years ago
Results from ActiveDirectory may be ordered by objectSid.
We can get all users for each page size by modify filter.

<?php
// ... connect to ldap
$lastsid='';
while (1) {
    $filter = '(objectClass=user)';
    if (strlen($lastsid)) {
        list($v)=array_values(unpack('V',substr($lastsid,24))); // id for user.
        $s = substr($lastsid,0,24).pack('V',1+$v); // next sid.
        $s = preg_replace('/../','\\\\$0',bin2hex($s)); // escape for fiter
        $filter = '(&'.$filter.'(objectSid>='.$s.'))'; // fiter for next entries.
    }
    $res = ldap_search($ldap,$basedn,$filter,array('objectSid','cn'));
    if (!ldap_count_entries($ldap,$res)) {
        break;
    }
    for ($ent=ldap_first_entry($ldap,$res); $ent; $ent=ldap_next_entry($ldap,$ent)) {
        list($lastsid) = ldap_get_values_len($ldap,$ent,'objectSid');
    }
}
?>
up
-7
Anonymous
16 years ago
HOWTO list LDAP users.

This CODE list one user from LDAP tree, but I' like list all user from LDAP one ou=Organization

<?php

$ldaprdn = 'cn=user,dc=domain,dc=org';
$ldappass = 'password';
$sdn = 'cn=user,ou=group,dc=domain,dc=org';

$ldapconn = ldap_connect("ldap://localhost", 389)
or die("Not connect: $ldaphost ");

if ($ldapconn) {

// binding to ldap server
$ldapbind = ldap_bind($ldapconn, $ldaprdn, $ldappass);

// verify binding
if ($ldapbind) {
$filter="uid=*";
$justthese = array("uid");

$sr=ldap_read($ldapconn, $srdn, $filter, $justthese);
$entry = ldap_get_entries($ldapconn, $sr);

} else {
echo "LDAP conn ok...";
}

}

ldap_close($ldapconn);

?>
<?php
echo $entry[0]["mail"][0] . " mail adress ";
echo $entry[0]["sn"][0] . " Name ";
?>
up
-6
rsu_friend at yahoo dot com
17 years ago
I was doing a ldap_search with
$searchbasedn = "miDomainName=" . $_SESSION['selectDomain'] ."," . LDAP_DOMAINBASE;
$filter = "(&(mpsAccountNumber=". $acctNumber .")(objectclass=mpsAccountDetails))";   
$attributes = array("mpsparentchild");

$sr = ldap_search($ldapconn, $searchbasedn, $filter,$attributes); 

For some reasone this search was failing
but I was able to do successful search only when I gave the search filter as
$filter = "(&(mpsAccountNumber= $acctNumber )(objectclass=mpsAccountDetails))";   

I did not get why the ldap_search was not able to search in the first case.
add a noteadd a note

官方地址：https://www.php.net/manual/en/function.ldap-search.php

有任何技术问题请点击这里 网站运营推广招聘
IT PHP 编程语言 Linux 开发编程 科技 Elasticsearch HTML/CSS/XML 网络 JAVA NoSQL 数据库 面试 C/C++ Golang Git 算法 操作系统 正则表达式 Redis 互联网 MySql JavaScript 运维 软件 国际 架构设计 Mac OS TCP/IP Excel Vim Windows Socket Oracle VR MongoDB Python 运营 MemCache 商业 硬件 电子 娱乐 设计 nginx 摄影 游戏 WordPress HTTP 团建 数码电器
冷却塔厂家 广告
-- --
php7 安装fileinfo扩展 preg_split — 通过一个正则表达式分隔字符串 php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题 [PHP] inet_pton/inet_ntop IP地址转换函数 array_multisort() 多字段排序 PHPMailer设置utf8 PHPMailer字符集CharSet ADORecordSet对象 adodb手册 PHP 8.1 [鸟哥]PHP_INT_MIN 和 -9223372036854775808 opcache预加载 Composer的Packagist资源 mysql面试题 [鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式 PHP7添加redis扩展 PHP mkdir()写出来的权限与mode值不符合 Packagist / Composer 中国全量镜像 PHP获取指定函数定义在哪个文件中及行号 支持php7的性能采集扩展 php $_SERVER中的SERVER_NAME 和HTTP_HOST的区别
联系我们 半月雨文化 可降解耗材网 蓝云环保 78免费小説 上海网站seo优化 工程造价 币安app官网下载 seo查询
北京半月雨文化科技有限公司.版权所有 京ICP备12026184号-3