PHP - Manual: imagefill

2024-11-13

imagefilledarc »

« imageellipse

imagefill

(PHP 4, PHP 5, PHP 7, PHP 8)

imagefill — 区域填充

说明

imagefill(
    resource $image,
    int $x,
    int $y,
    int $color
): bool

imagefill() 在 image 图像的坐标 x，y（图像左上角为 0, 0）处用 color 颜色执行区域填充（即与 x, y 点颜色相同且相邻的点都会被填充）。

示例 #1 imagefill() 例子


<?php

$im = imagecreatetruecolor(100, 100);

// 将背景设为红色
$red = imagecolorallocate($im, 255, 0, 0);
imagefill($im, 0, 0, $red);

header('Content-type: image/png');
imagepng($im);
imagedestroy($im);
?>

参见 imagecolorallocate()。

add a note

User Contributed Notes 16 notes

down

George Edison ¶

9 years ago


Creating a new true-color image, filling it with a transparent color, and saving it as a PNG image can be accomplished with the following:

<?php

$new   = imagecreatetruecolor(320, 320);
$color = imagecolorallocatealpha($new, 0, 0, 0, 127);
imagefill($new, 0, 0, $color);
imagesavealpha($new, TRUE); // it took me a good 10 minutes to figure this part out
imagepng($new);

?>

The image needs to be created with imagecreatetruecolor(), you must use imagefill() instead of imagefilledrectange(), and you need to call imagesavealpha(). No other combination of functions calls seems to produce the intended results.

down

Christopher Kramer ¶

12 years ago


Here is a function to generate a gradient.
You specify width, heigth and 4 colors (of the 4 corners).

An image handle of the gradient image will be returned.
You can copy the returned image onto another image using imageecopy.
This can be helpful if you want to generate a shadow for example.
("Glow effect example": Generate 8 gradients, one for each side and one for each corner. The outer side of the gradients have the background color and the inner sides have a bright color such as white.)  

But beware: This function is not optimized for performance, it might become slow on big images. For shadows, better cache the generated gradients.

Note: For gradients, using true-color is highly recommended.

<?php

function gradient($w=100, $h=100, $c=array('#FFFFFF','#FF0000','#00FF00','#0000FF'), $hex=true) {

/*
 Generates a gradient image

 Author: Christopher Kramer

 Parameters:
 w: width in px
 h: height in px
 c: color-array with 4 elements:
    $c[0]:   top left color
    $c[1]:   top right color
    $c[2]:   bottom left color
    $c[3]:   bottom right color
    
 if $hex is true (default), colors are hex-strings like '#FFFFFF' (NOT '#FFF')
 if $hex is false, a color is an array of 3 elements which are the rgb-values, e.g.:
 $c[0]=array(0,255,255);

 */

$im=imagecreatetruecolor($w,$h);

 if($hex) {  // convert hex-values to rgb
  for($i=0;$i<=3;$i++) { 
   $c[$i]=hex2rgb($c[$i]);
  }
 }

$rgb=$c[0]; // start with top left color
for($x=0;$x<=$w;$x++) { // loop columns
  for($y=0;$y<=$h;$y++) { // loop rows
   // set pixel color 
   $col=imagecolorallocate($im,$rgb[0],$rgb[1],$rgb[2]);
   imagesetpixel($im,$x-1,$y-1,$col);
   // calculate new color  
   for($i=0;$i<=2;$i++) {
    $rgb[$i]=
      $c[0][$i]*(($w-$x)*($h-$y)/($w*$h)) +
      $c[1][$i]*($x     *($h-$y)/($w*$h)) +
      $c[2][$i]*(($w-$x)*$y     /($w*$h)) +
      $c[3][$i]*($x     *$y     /($w*$h));
   }
  }
 }
 return $im;
}

function hex2rgb($hex)
 {
$rgb[0]=hexdec(substr($hex,1,2));
$rgb[1]=hexdec(substr($hex,3,2));
$rgb[2]=hexdec(substr($hex,5,2));
 return($rgb);
 }

// usage example

$image=gradient(300, 300, array('#000000', '#FFFFFF', '#FF0000', '#0000FF'));

header('Content-type: image/png');
imagepng($image);
imagedestroy($image);

?>

down

pisu at estmail dot hu ¶

16 years ago


chess board
<?php

$kep = imagecreate(400,400);
$fekete = imagecolorallocate($kep,0,0,0);
$feher = imagecolorallocate($kep,255,255,255);

//imagefill($kep,50,50,$fekete);
imagefill($kep,50,20,$feher);

for ($i=1;$i<8;$i++)  {
  $k = $i*50;
  imageline($kep,0,$k,400,$k,$fekete);
  imageline($kep,$k,0,$k,400,$fekete);
  }

for ($i=0;$i<8;$i++)  {
  for ($j=0;$j<8;$j++)  {
    $x = $i*50 + 2;
        $y = $j*50 + 2;
    if (  ( ($i % 2) + ($j % 2) )  % 2 == 0 )  {
          imagefill($kep,$x,$y,$fekete);
          }

    }
  }

// imagecolortransparent($kek,$piros);

header('content-type : image/png');
imagepng($kep);

?>

down

dunhamzzz [A] gmail ¶

13 years ago


I feel its worth pointing out that you cannot fill a transparent colour that you have assigned with imagecolorallocatealpha, the colour will fill, but without its transparency,

I find the easiest method around this is to just fill a rectangle using imagefilledrectangle() to draw a fill instead.

down

gelak ¶

16 years ago


//A smiley face ;]


<?php


header('Content-type: image/png');


$smile=imagecreate(400,400);

$kek=imagecolorallocate($smile,0,0,255);

$feher=imagecolorallocate($smile,255,255,255);

$sarga=imagecolorallocate($smile,255,255,0);

$fekete=imagecolorallocate($smile,0,0,0);

imagefill($smile,0,0,$kek);


imagearc($smile,200,200,300,300,0,360,$fekete);

imagearc($smile,200,225,200,150,0,180,$fekete);

imagearc($smile,200,225,200,123,0,180,$fekete);

imagearc($smile,150,150,20,20,0,360,$fekete);

imagearc($smile,250,150,20,20,0,360,$fekete);

imagefill($smile,200,200,$sarga);

imagefill($smile,200,290,$fekete);

imagefill($smile,155,155,$fekete);

imagefill($smile,255,155,$fekete);

imagepng($smile);


?>

down

Gromitt ¶

15 years ago


If you need to fill a whole image (immediatly after its creation for instance), consider applying a filled rectangle instead, using imagefilledrectangle() :

<?php

$gdImage = imagecreatetruecolor(100, 100);
$gdColor = imagecolorallocate($gdImage, 255, 0, 0); // red
imagefilledrectangle($gdImage, 0, 0, 99, 99, $gdColor);

?>

which will require much less logic and processing from GD.

down

oleh at it dot wihola dot com ¶

4 years ago


is there any point to use $x and $y coordinates? They doesn't affect an output in any way. I can no make rectangular half filled with color. These params are useless.

down

razonklnbd at yahoo dot com ¶

15 years ago


I spend more then two hour to find a function that can fill a pattern or file as background instead of color. but i can't find. so i develop the following function. i though this function will save time who need it...

Function will get four parameter
1. Main Image Identifier
2. Pattern Image Identifier
3. Final Image Width
4. Final Image Height

If you set final image width or height is less then main image width or height then you may get wrong result

<?php

function fill_with_patternfile($p_main_im, $p_patternfile_im, $p_width, $p_height){
    $pimiX=$p_patternfile_im;
    $pw=imagesx($pimiX);
    $ph=imagesy($pimiX);
    $targetImageIdentifier=imagecreatetruecolor($p_width,$p_height);
    if($pw<$p_width && $ph<$p_height){
        for($pX=0;$pX<$p_width;$pX+=$pw){
            for($pY=0;$pY<$p_height;$pY+=$ph){
                imagecopy($targetImageIdentifier,$pimiX,$pX,$pY,0,0,$pw,$ph);
            }
        }
    }else imagecopy($targetImageIdentifier,$pimiX,0,0,0,0,$pw,$ph);
    $w=imagesx($p_main_im);
    $h=imagesy($p_main_im);
    $nX=0;
    if($w<$p_width) $nX=intval(($p_width-$w)/2);
    $nY=0;
    if($h<$p_height) $nY=intval(($p_height-$h)/2);
    imagecopy($targetImageIdentifier,$p_main_im,$nX,$nY,0,0,$w,$h);
    return $targetImageIdentifier;
}
//    If you want to use a gif or png file as
//    pattern file you need to change function below :)
$pattern_im=imagecreatefromjpeg('logo.jpg');
//    If you want to use a gif or png file as
//    main file you need to change function below :)
$main_im=imagecreatefromjpeg('r2.jpg');
//    call the function width 500 and height 500
//    if your width and height is less then main images
//    width and height then you can't understand any change!
$final=fill_with_patternfile($main_im, $pattern_im, 500, 500);
//    view the image and destroy all instance
header('Content-type: image/jpeg');
imagejpeg($final);
imagedestroy($final);
imagedestroy($main_im);
imagedestroy($pattern_im);
exit();

?>

down

aqmprod at iname dot com ¶

22 years ago


This function does not seem to work with images already been transparent. If you fill at x=0, y=0, and there are still transparent parts that you did

not reach with your fill, they change to a different color.


The ImageColorSet function seems to be the solution, but i can't work with transparancy.

down

-1

colin at galaxyinteractive dot net ¶

16 years ago


Didn't see this documented, although it's outlined in imagefilledrectangle, it wasn't quite so obvious to me at first

imageSetTile($image,$imageBack);
imagefill($image,0,0,IMG_COLOR_TILED);

Will fill an image with a texture (this is great as I'm building a logo/template creator)

down

-1

norxh ¶

19 years ago


For new images, you must allocate a color before this function will work.

down

-1

Anonymous ¶

19 years ago


Actually, it can handle pre-transparent images. To remove it you need to do something like:
   imagecolortransparent($img, 0);
to null out the previous transparency colors. ;)

down

-2

Igor Garcia ¶

18 years ago


This function, cannot deal with transparencies. 
So you need to use imagecolorallocate instead of imagecolorallocatealpha.
Thus, be careful with color variables that allready set with imageallocatecoloralpha because this can slow-down or hang-up your system.

down

-1

Cypog ¶

14 years ago


imagefill can't deal with alpha colors, use imagefilledrectangle instead.

<?php

    header("Content-Type: image/png");
    $im = imagecreatefrompng("img/button.png");
    if (empty($_GET['alpha']))
        {$_GET['alpha'] = 10;}
    $color = imagecolorallocatealpha($im, 255, 255, 255, $_GET['alpha']);
    imagefillalpha($im, $color);
    imagepng($im);
    imagedestroy($im);

    function ImageFillAlpha($image, $color)
    {
        imagefilledrectangle($image, 0, 0, imagesx($image), imagesy($image), $color);
    }

?>

down

-2

jonathan dot aquino at gmail dot com ¶

16 years ago


Use imageSaveAlpha($image, true); to preserve transparency.

down

-4

info at educar dot pro dot br ¶

15 years ago


Example 1
The filled region will be external to a demarcated region, if the initial coordinates will be outside of this region.

<?php
$src621 = imagecreate(200,200); 
$clr_1_621 = imagecolorallocate($src621, 255, 255, 0);
$clr_2_621 = imagecolorallocate($src621, 0, 0, 250);
$clr_4_621 = imagecolorallocate($src621, 2,2,55);
imagerectangle($src621, 100, 100, 150, 150, $clr_4_621);
imagefill($src621, 110, 110, $clr_2_621);
header("Content-Type: image/png");
imagepng ($src621);
imagedestroy($src621);
?>

Example 2
The filled region will be internal to a demarcated region, if the initial coordinates will be inside of this region. 
<?php
$src622 = imagecreate(200,200); 
$clr_1_622 = imagecolorallocate($src622, 255, 255, 0);
$clr_2_622 = imagecolorallocate($src622, 0, 0, 250);
$clr_4_622 = imagecolorallocate($src622, 2,2,55);
imagerectangle($src622, 100, 100, 150, 150, $clr_4_622);
imagefill($src622, 10, 10, $clr_2_622);
header("Content-Type: image/png");
imagepng ($src622);
imagedestroy($src622);
?>

See another examples at:
http://www.educar.pro.br/a/gdlib/index.php?pn=50&tr=97

add a note

官方地址：https://www.php.net/manual/en/function.imagefill.php

有任何技术问题请点击这里网站运营推广招聘

IT PHP 编程语言 Linux 开发编程科技 Elasticsearch HTML/CSS/XML 网络 JAVA NoSQL 数据库面试 C/C++ Golang Git 算法操作系统正则表达式 Redis 互联网 MySql JavaScript 运维软件国际架构设计 Mac OS TCP/IP Excel Vim Windows Socket Oracle VR MongoDB Python 运营 MemCache 商业硬件电子娱乐设计 nginx 摄影游戏 WordPress HTTP 团建数码电器

php7 安装fileinfo扩展 preg_split — 通过一个正则表达式分隔字符串 php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题 [PHP] inet_pton/inet_ntop IP地址转换函数 array_multisort() 多字段排序 PHPMailer设置utf8 PHPMailer字符集CharSet ADORecordSet对象 adodb手册 PHP 8.1 [鸟哥]PHP_INT_MIN 和 -9223372036854775808 opcache预加载 Composer的Packagist资源 mysql面试题 [鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式 PHP7添加redis扩展 PHP mkdir()写出来的权限与mode值不符合 Packagist / Composer 中国全量镜像 PHP获取指定函数定义在哪个文件中及行号支持php7的性能采集扩展 php $_SERVER中的SERVER_NAME 和HTTP_HOST的区别

略微加速

PHP官方手册 - 互联网笔记

imagefill

说明

User Contributed Notes 16 notes