This is a short example of use gzwrite function.
<?php
function gzcompressfile($source,$level=false){
$dest=$source.'.gz';
$mode='wb'.$level;
$error=false;
if($fp_out=gzopen($dest,$mode)){
if($fp_in=fopen($source,'rb')){
while(!feof($fp_in))
gzwrite($fp_out,fread($fp_in,1024*512));
fclose($fp_in);
}
else $error=true;
gzclose($fp_out);
}
else $error=true;
if($error) return false;
else return $dest;
}
?>
the function gzcompressfile() compress a file 'data.csv' to 'data.csv.gz'. the function return false if error, and the new file name if it's ok.
PHP - Manual: gzwrite
2024-11-14
gzwrite
(PHP 4, PHP 5, PHP 7, PHP 8)
gzwrite — Binary-safe gz-file write
说明
gzwrite(resource
$stream, string $data, ?int $length = null): int|false
gzwrite() writes the contents of
data to the given gz-file.
参数
-
stream -
The gz-file pointer. It must be valid, and must point to a file successfully opened by gzopen().
-
data -
The string to write.
-
length -
The number of uncompressed bytes to write. If supplied, writing will stop after
length(uncompressed) bytes have been written or the end ofdatais reached, whichever comes first.
返回值
Returns the number of (uncompressed) bytes written to the given gz-file
stream, 或者在失败时返回 false.
更新日志
| 版本 | 说明 |
|---|---|
| 8.0.0 |
length is nullable now; previously, the default was
0.
|
| 7.4.0 |
This functions returns false on failure now; previously 0 was returned.
|
范例
示例 #1 gzwrite() example
<?php
$string = 'Some information to compress';
$gz = gzopen('somefile.gz','w9');
gzwrite($gz, $string);
gzclose($gz);
?>
add a note
User Contributed Notes 6 notes
Kioob ¶
18 years ago
calmarius at nospam dot atw dot hu ¶
13 years ago
gz compression is often used with tar archives. Building tar archives is quite easy. Here is a code snipplet which can be used for building tar archives before compressing them to tar.gz.
<?php
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
// Adds file header to the tar file, it is used before adding file content.
// f: file resource (provided by eg. fopen)
// phisfn: path to file
// archfn: path to file in archive, directory names must be followed by '/'
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
function TarAddHeader($f,$phisfn,$archfn)
{
$info=stat($phisfn);
$ouid=sprintf("%6s ", decoct($info[4]));
$ogid=sprintf("%6s ", decoct($info[5]));
$omode=sprintf("%6s ", decoct(fileperms($phisfn)));
$omtime=sprintf("%11s", decoct(filemtime($phisfn)));
if (@is_dir($phisfn))
{
$type="5";
$osize=sprintf("%11s ", decoct(0));
}
else
{
$type='';
$osize=sprintf("%11s ", decoct(filesize($phisfn)));
clearstatcache();
}
$dmajor = '';
$dminor = '';
$gname = '';
$linkname = '';
$magic = '';
$prefix = '';
$uname = '';
$version = '';
$chunkbeforeCS=pack("a100a8a8a8a12A12",$archfn, $omode, $ouid, $ogid, $osize, $omtime);
$chunkafterCS=pack("a1a100a6a2a32a32a8a8a155a12", $type, $linkname, $magic, $version, $uname, $gname, $dmajor, $dminor ,$prefix,'');
$checksum = 0;
for ($i=0; $i<148; $i++) $checksum+=ord(substr($chunkbeforeCS,$i,1));
for ($i=148; $i<156; $i++) $checksum+=ord(' ');
for ($i=156, $j=0; $i<512; $i++, $j++) $checksum+=ord(substr($chunkafterCS,$j,1));
fwrite($f,$chunkbeforeCS,148);
$checksum=sprintf("%6s ",decoct($checksum));
$bdchecksum=pack("a8", $checksum);
fwrite($f,$bdchecksum,8);
fwrite($f,$chunkafterCS,356);
return true;
}
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
// Writes file content to the tar file must be called after a TarAddHeader
// f:file resource provided by fopen
// phisfn: path to file
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
function TarWriteContents($f,$phisfn)
{
if (@is_dir($phisfn))
{
return;
}
else
{
$size=filesize($phisfn);
$padding=$size % 512 ? 512-$size%512 : 0;
$f2=fopen($phisfn,"rb");
while (!feof($f2)) fwrite($f,fread($f2,1024*1024));
$pstr=sprintf("a%d",$padding);
fwrite($f,pack($pstr,''));
}
}
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
// Adds 1024 byte footer at the end of the tar file
// f: file resource
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
function TarAddFooter($f)
{
fwrite($f,pack('a1024',''));
}
?>
Anonymous ¶
14 years ago
katzlbtjunk's method is certainly shorter, but it is unusable for anything except small files. It would try to load the whole file into memory, then create an entire compressed copy, and only then write it to disk. The other method given below will not exhaust memory like that.
Take Heed ¶
11 years ago
Read the description of gzwrite() very carefully. If the 'length' option is not specified, then the input data will have slashes stripped on systems where magic quotes are enabled. This is important information to know when compressing files.
<?php
$data = fread($fp, 5000);
gzwrite($fp2, $data, strlen($data));
?>
Is the correct way to avoid issues with magic quotes.
repository at lamaresh dot net ¶
13 years ago
This function add a line to a .gz compressed file
<?php
function AppendLineGz($file,$string) {
if (file_exists($file)) {
$lines = gzfile($file);
$lines[count($lines)] = "$string\r\n";
$input=implode($lines);
} else {$input="$string\r\n";}
$gz = gzopen($file,'w9');
gzwrite($gz, $input);
gzclose($gz);
}
?>
katzlbtjunk at hotmail dot com ¶
14 years ago
How about this instead:
$s = file_get_contents('file.tar');
file_put_contents('file.tar.gz',gzencode($s,9));
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
利用php soap实现web service
PHP获取指定函数定义在哪个文件中及行号
支持php7的性能采集扩展