A trick to detecting if a connection is closed without having to send data that will otherwise corrupt the stream of data (like a binary file) you can use a combination of chunking the data on HTTP/1.1 by sending a "0" ("zero") as a leading chunk size without anything else.
*NOTE* it's important to note that it's not a good idea to check the stream more then once every few seconds. By doing this you are potentially increasing the data sent to the user with no gain to the user.
A good reason to do it this way is if you are generating a report that takes a long time to run and takes a lot of server resources. This would allow the server to detect if a user canceled the download and do any cleanup without corrupting the file file being download.
Here is an example:
<?php
ignore_user_abort(true);
header('Transfer-Encoding:chunked');
ob_flush();
flush();
$start = microtime(true);
$i = 0;
// Use this function to echo anything to the browser.
function vPrint($data){
if(strlen($data))
echo dechex(strlen($data)), "\r\n", $data, "\r\n";
ob_flush();
flush();
}
// You MUST execute this function after you are done streaming information to the browser.
function endPacket(){
echo "0\r\n\r\n";
ob_flush();
flush();
}
do{
echo "0";
ob_flush();
flush();
if(connection_aborted()){
// This happens when connection is closed
file_put_contents('/tmp/test.tmp', sprintf("Conn Closed\nTime spent with connection open: %01.5f sec\nLoop itterations: %s\n\n", microtime(true) - $start, $i), FILE_APPEND);
endPacket();
exit;
}
usleep(50000);
vPrint("I get echo'ed every itteration (every .5 second)<br />\n");
}while($i++ < 200);
endPacket();
?>
PHP - Manual: connection_aborted
2024-11-15
connection_aborted
(PHP 4, PHP 5, PHP 7, PHP 8)
connection_aborted — 检查客户端是否已经断开
说明
connection_aborted(): int
检查客户端是否已经断开。
返回值
如果客户端已经断开则返回1，否则返回0。
add a note
User Contributed Notes 7 notes
nathanb at php dot net ¶
9 years ago
sivann at gmail dot com ¶
6 years ago
I have failed to get accurate results from this even with echo, flush(), and other buffer manipulation trickery. The following function detects connection status from the OS netstat(1) in linux, even without echoing anything. You may need to alter the parsing for windows or older versions of netstat. It calls an external command so it consume some resources, use it with care e.g. you can call it every some seconds while waiting for long-poll requests. Not tested with ipv6.
//returns connection status (ESTABLISHED, TIME_WAIT, etc) or NOT_FOUND
function getConnectionStatus() {
$remote_ip = $_SERVER['REMOTE_ADDR']?:($_SERVER['HTTP_X_FORWARDED_FOR']?:$_SERVER['HTTP_CLIENT_IP']);
$remote_port=$_SERVER['REMOTE_PORT'];
$cmd="netstat -tn | fgrep ' $remote_ip:$remote_port '";
$pfp=popen($cmd,"r");
if(!$pfp) {
error_log ("getConnectionStatus: $cmd");
}
$buf = fgets($pfp, 1024);
pclose($pfp);
$buf=preg_replace('!\s+!', ' ', $buf); //remove multiple spaces
$buf=trim($buf);
$buf_r=explode(" ",$buf);
if (count($buf_r)) {
$state=$buf_r[count($buf_r)-1];
return trim($state);
}
return "NOTFOUND";
}
//check for it:
if (getConnectionStatus() != "ESTABLISHED") { ...}
Luciano ¶
12 years ago
In order to detect a disconnection inside the script we need to flush the buffer (it is only when the the server tries to send the buffer content that it will see that the connection is broken).
Thus we need to use the ob_implicit_flush() function to flush automatically the buffer
This is an example of a disconnection detection :
<?php
// enables the automatic flush
ob_implicit_flush();
function verifyCommunication() {
$status = (connection_aborted()?"not ":"") ."sent";
persistCommunication(new Communication($status));
}
// we will check the communication state when the script finished
register_shutdown_function(verifyCommunication);
echo "blabla";
// this sleep is used to have time to break the connection on the client side
sleep(10);
echo"tata";
?>
I use such a process to cancel a request if the client didn't get the acknowledgement because he will redo his request...
jeff1326 at hotmail dot com ¶
6 years ago
From ignore_user_abort function :
PHP will not detect that the user has aborted the connection until an attempt is made to send information to the client. Simply using an echo statement does not guarantee that information is sent, see flush().
This rule seems to apply here too.
jamest344 at gmail dot com ¶
4 years ago
Declaration: I'm a novice.
The action on client connection loss which I wanted occurred upon browser or tab closure but not upon network link severance. This was remedied by nobbling apache2's mod_deflate. Other conf settings I changed may also be important (timeout?). Thus at the bottom of my page.html I have:
<script>
var xhttp = new XMLHttpRequest();
xhttp.onreadystatechange = function() {
if (this.readyState == 4 && this.status == 200) {
}
};
xhttp.open("GET", "Caller.php", true);
xhttp.send();
</script>
Then in Caller.php I have:
<?php
ignore_user_abort(TRUE);
Header('Location: monitor.php');
?>
And in monitor.php:
<?php
ignore_user_abort(TRUE);
set_time_limit(0);
echo connection_status();
while(1)
{
echo "something - anything - to go here - need a good few lines of it";
ob_flush();
flush();
sleep(1);
if(connection_status()!=0)
{
break;
}
}
shell_exec("DESIRED ACTION HERE");
?>
phpcoder at cyberpimp dot techlab dot info ¶
14 years ago
Although the documentation indicates it returns an int, I found comparing the return value with numeric values does not seem to work.
Example (does not work):
<?php
if (connection_aborted()==1) {
fwrite($filehandle, 'aborted!');
}
?>
You're better off just assuming it returns boolean
Example (does work):
<?php
if (connection_aborted()) {
fwrite($filehandle, 'aborted!');
}
?>
rickyale at ig dot com dot br ¶
12 years ago
(connection_aborted not working)
I had this problem years ago, now the problem came back after upgrading php... i tried everything i found and in the end the function ob_end_flush(); on top of script as post in php bug track solved the problem. Im using windows 7 x64 / php 5.2.4 / apache 2.2.14 (win32)
try adding ob_end_flush(); on top of you script.
i read something about this but can't remember where, it was related to a bug or something.
hope this help.
官方地址：https://www.php.net/manual/en/function.connection-aborted.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
PHP获取指定函数定义在哪个文件中及行号
支持php7的性能采集扩展
adodb连接mysql多个数据库的问题