FILTER_VALIDATE_URL does not work with URNs, examples of valid URIs according to RFC3986 and if they are accepted by FILTER_VALIDATE_URL:
[PASS] ftp://ftp.is.co.za.example.org/rfc/rfc1808.txt
[PASS] gopher://spinaltap.micro.umn.example.edu/00/Weather/California/Los%20Angeles
[PASS] http://www.math.uio.no.example.net/faq/compression-faq/part1.html
[PASS] mailto:mduerst@ifi.unizh.example.gov
[PASS] news:comp.infosystems.www.servers.unix
[PASS] telnet://melvyl.ucop.example.edu/
[PASS] http://www.ietf.org/rfc/rfc2396.txt
[PASS] ldap://[2001:db8::7]/c=GB?objectClass?one
[PASS] mailto:John.Doe@example.com
[PASS] news:comp.infosystems.www.servers.unix
[FAIL] tel:+1-816-555-1212
[PASS] telnet://192.0.2.16:80/
[FAIL] urn:oasis:names:specification:docbook:dtd:xml:4.1.2
PHP - Manual: Validate filters
2024-11-13
Validate filters
| ID | Name | Options | Flags | Description |
|---|---|---|---|---|
FILTER_VALIDATE_BOOLEAN,
FILTER_VALIDATE_BOOL
|
"boolean" |
default
|
FILTER_NULL_ON_FAILURE
|
Returns
If |
FILTER_VALIDATE_DOMAIN |
"validate_domain" |
default
|
FILTER_FLAG_HOSTNAME,
FILTER_NULL_ON_FAILURE
|
Validates whether the domain name label lengths are valid.
Validates domain names against RFC 1034, RFC 1035, RFC 952,
RFC 1123, RFC 2732, RFC 2181, and RFC 1123. Optional flag
|
FILTER_VALIDATE_EMAIL |
"validate_email" |
default
|
FILTER_FLAG_EMAIL_UNICODE,
FILTER_NULL_ON_FAILURE
|
Validates whether the value is a valid e-mail address.
In general, this validates e-mail addresses against the |
FILTER_VALIDATE_FLOAT |
"float" |
default,
decimal,
min_range,
max_range
|
FILTER_FLAG_ALLOW_THOUSAND,
FILTER_NULL_ON_FAILURE
|
Validates value as float, optionally from the specified range, and converts to float on success. |
FILTER_VALIDATE_INT |
"int" |
default,
min_range,
max_range
|
FILTER_FLAG_ALLOW_OCTAL,
FILTER_FLAG_ALLOW_HEX,
FILTER_NULL_ON_FAILURE
|
Validates value as integer, optionally from the specified range, and converts to int on success. |
FILTER_VALIDATE_IP |
"validate_ip" |
default
|
FILTER_FLAG_IPV4,
FILTER_FLAG_IPV6,
FILTER_FLAG_NO_PRIV_RANGE,
FILTER_FLAG_NO_RES_RANGE,
FILTER_NULL_ON_FAILURE
|
Validates value as IP address, optionally only IPv4 or IPv6 or not from private or reserved ranges. |
FILTER_VALIDATE_MAC |
"validate_mac_address" |
default
|
FILTER_NULL_ON_FAILURE
|
Validates value as MAC address. |
FILTER_VALIDATE_REGEXP |
"validate_regexp" |
default,
regexp
|
FILTER_NULL_ON_FAILURE
|
Validates value against regexp, a
Perl-compatible regular expression.
|
FILTER_VALIDATE_URL |
"validate_url" |
default
|
FILTER_FLAG_SCHEME_REQUIRED,
FILTER_FLAG_HOST_REQUIRED,
FILTER_FLAG_PATH_REQUIRED,
FILTER_FLAG_QUERY_REQUIRED,
FILTER_NULL_ON_FAILURE
|
Validates value as URL (according to » http://www.faqs.org/rfcs/rfc2396), optionally with required components. Beware a valid URL may not specify the HTTP protocol http:// so further validation may be required to determine the URL uses an expected protocol, e.g. ssh:// or mailto:. Note that the function will only find ASCII URLs to be valid; internationalized domain names (containing non-ASCII characters) will fail. |
注意:
When
defaultis set to option,default's value is used if value is not validated.
更新日志
| 版本 | 说明 |
|---|---|
| 8.0.0 |
Added FILTER_VALIDATE_BOOL as an alias for FILTER_VALIDATE_BOOLEAN.
Using FILTER_VALIDATE_BOOL is preferred.
|
| 7.4.0 |
Added min_range and max_range
options for FILTER_VALIDATE_FLOAT.
|
| 7.0.0 |
Added FILTER_FLAG_HOSTNAME and FILTER_VALIDATE_DOMAIN.
|
add a note
User Contributed Notes 25 notes
boy at relaxnow dot nl ¶
9 years ago
bee kay two at em ee dot com ¶
10 years ago
Notably missing is a way to validate text entry as printable,
printable multiline,
or printable and safe (tag free)
FILTER_VALIDATE_TEXT, which validates no special characters
perhaps with FILTER_FLAG_ALLOW_NEWLINE
and FILTER_FLAG_NOTAG to disallow tag starters
MR Yekta ¶
2 years ago
since php 7.4
you can use these 3 beautiful conditions for from validation for validation less, great or in range
<?php
/**
* less_than_equal_to
*/
$x = 50;
if (filter_var($x, FILTER_VALIDATE_FLOAT, ["options" => ["max_range" => 100]]) !== false) {
echo "result : $x is less than OR equal to 100";
} else {
echo "result : $x is NOT less than OR equal to 100";
}
?>
result : 50 is less than OR equal to 100
<?php
/**
* greater_than_equal_to
*/
$x = 50;
if (filter_var($x, FILTER_VALIDATE_FLOAT, ["options" => ["min_range" => 100]]) !== false) {
echo "result : $x is greater than OR equal to 100";
} else {
echo "result : $x is NOT greater than OR equal to 100";
}
?>
result : 50 is NOT greater than OR equal to 100
<?php
/**
* less_than_equal_to && greater_than_equal_to
*/
$x = 50;
if (filter_var($x, FILTER_VALIDATE_FLOAT, ["options" => ["min_range" => 0 , "max_range"=> 100]]) !== false) {
echo "result : $x is in range of 0 to 100";
} else {
echo "result : $x in NOT range of 0 to 100";
}
?>
result : 50 is in range of 0 to 100
gee2711 at googlemail dot com ¶
4 years ago
FILTER_FLAG_QUERY_REQUIRED is failing URLs that are encoded e.g.
http://example.com/page.php?q=growing+big
Fails whilst
http://example.com/page.php?q=big
So anything more than one word encoded fails.
Tested on PHP version 7.1
boan at jfmedier dot dk ¶
7 months ago
Note that some flags are removed in PHP 8. E.g. FILTER_FLAG_HOST_REQUIRED
andrew dot purkett at gmail dot com ¶
2 years ago
Please note that the FILTER_FLAG_NO_PRIV_RANGE flag does not exclude IPv4 private addresses in the IPv6 namespace, such as ::ffff:169.254.169.254.
rowan dot collins at gmail dot com ¶
9 years ago
Regarding "partial" addresses with no . in the domain part, a comment in the source code (in ext/filter/logical_filters.c) justifies this rejection thus:
* The regex below is based on a regex by Michael Rushton.
* However, it is not identical. I changed it to only consider routeable
* addresses as valid. Michael's regex considers a@b a valid address
* which conflicts with section 2.3.5 of RFC 5321 which states that:
*
* Only resolvable, fully-qualified domain names (FQDNs) are permitted
* when domain names are used in SMTP. In other words, names that can
* be resolved to MX RRs or address (i.e., A or AAAA) RRs (as discussed
* in Section 5) are permitted, as are CNAME RRs whose targets can be
* resolved, in turn, to MX or address RRs. Local nicknames or
* unqualified names MUST NOT be used.
Clifton ¶
11 years ago
FILTER_VALIDATE_EMAIL does NOT allow incomplete e-mail addresses to be validated as mentioned by Tomas.
Using the following code:
<?php
$email = "clifton@example"; //Note the .com missing
echo "PHP Version: ".phpversion().'<br>';
if(filter_var($email, FILTER_VALIDATE_EMAIL)){
echo $email.'<br>';
var_dump(filter_var($email, FILTER_VALIDATE_EMAIL));
}else{
var_dump(filter_var($email, FILTER_VALIDATE_EMAIL));
}
?>
Returns:
PHP Version: 5.2.14 //On MY server, may be different depending on which version you have installed.
bool(false)
While the following code:
<?php
$email = "clifton@example.com"; //Note the .com added
echo "PHP Version: ".phpversion().'<br>';
if(filter_var($email, FILTER_VALIDATE_EMAIL)){
echo $email.'<br>';
var_dump(filter_var($email, FILTER_VALIDATE_EMAIL));
}else{
var_dump(filter_var($email, FILTER_VALIDATE_EMAIL));
}
?>
Returns:
PHP Version: 5.2.14 //On MY server, may be different depending on which version you have installed.
clifton@example.com
string(16) "clifton@example.com"
This feature is only available for PHP Versions (PHP 5 >= 5.2.0) according to documentation. So make sure your version is correct.
Cheers,
Clifton
bryanwayb at gmail dot com ¶
7 years ago
It's good to remember that using filter_var is primarily for filtering input values when doing boolean logic comparisons. Take the following:
$value = "12";
if(filter_var($value, FILTER_VALIDATE_INT))
{
// validated as an int
}
The above works as intended, except when $value = "0". In which case filter_var returns a 0, aka false when used as a boolean.
For the correct behavior, do a zero check.
$value = " 0 ";
$filtered = filter_var($value, FILTER_VALIDATE_INT);
if($filtered || $filtered === 0)
{
// validated as an int
}
sebastian dot piskorski at gmail dot com ¶
6 years ago
FILTER_VALIDATE_EMAIL not only doesn't support whitespace folding and comments. It only checks Addr-spec part of email address. Otherwise it should mark such address as valid: 'Test Example <test@example.com>' because it is valid according to RFC 822.
Also address "test@localhost" should be valid. Which is mentioned in another note.
You can test it with this code:
<?php
$emails = array(
'Test Example <test@example.com>',
'test@localhost',
'test@localhost.com'
);
foreach ($emails as $email) {
echo (filter_var($email, FILTER_VALIDATE_EMAIL)) ?
"[+] Email '$email' is valid\n" :
"[-] Email '$email' is NOT valid\n";
}
?>
Output for PHP 5.3.21 - 7.0.1 :
[-] Email 'Test Example <test@example.com>' is NOT valid
[-] Email 'test@localhost' is NOT valid
[+] Email 'test@localhost.com' is valid
carlosv775 at gmail dot com ¶
2 years ago
Looks like FILTER_VALIDATE_DOMAIN isn't available on PHP < 7:
https://3v4l.org/eOPLM
php dot net at piskvor dot org ¶
11 years ago
FILTER_VALIDATE_EMAIL is discarding valid e-mail addresses containing IDN. Since there are real, live IDNs on the Internet, that means the filtered output is too strict, leading to false negatives.
Punycode-encoded IDN addresses pass the filter correctly; so before checking for validity, it is necessary to convert the e-mail address to punycode.
Lech ¶
6 years ago
The description for FILTER_VALIDATE_URL seems incorrect/misleading. "Beware a valid URL may not specify the HTTP protocol" implies a valid URL cannot specify the HTTP protocol. I think "Beware a valid URL need not specify..." would be better.
maruerru at gmail dot com ¶
7 years ago
Often I see some code like the following:
$value = "12";
if( filter_var($value, FILTER_VALIDATE_INT) )
{
// validated as an int
}
The above works as intended, except when $value is "0". In the above case it will be interpreted as FALSE.
For the correct behavior, you have not only to check if it is equal (==) to false, but also identic (===) to FALSE:
$value = " 0 ";
if( filter_var($value, FILTER_VALIDATE_INT) === FALSE )
{
// validated as an int
}
I hope, I could help.
Bastien ¶
8 years ago
Rejection of so-called partial domains because of "missing" dot is not following section 2.3.5 of RFC 5321.
It says FQDNs are permitted, and com, org, or va are (well, may be) valids FQDNs. It depends on DNS, not on syntax.
Some TDLs (although few of them) have MX RRs, the for example "abuse@va" is correct.
luca at accomazzi dot net ¶
5 years ago
A word to the wise regarding floats.
$t = '312041.25 € instead of 896.70 €';
echo filter_var ($t, FILTER_SANITIZE_NUMBER_FLOAT, FILTER_FLAG_ALLOW_FRACTION);
will return
312041.25896.70
which is likely not what you were expecting. In 2007 someone suggested it's not acceptable (see https://bugs.php.net/bug.php?id=40156&edit=2) but it was flagged "not a bug" because these kind of filters are only supposed to filter out illegal characters.
Of course if you were to use FILTER_VALIDATE_FLOAT it would just return that the input is not valid.
rsnell at usgs dot gov ¶
6 years ago
Note that if using FILTER_NULL_ON_FAILURE as a flag with the FILTER_VALIDATE_BOOLEAN id then NULL is no longer returned if the variable name is not set in the external variable array. It will instead return FALSE. In the description is says that when using the FILTER_NULL_ON_FAILURE flag that ' FALSE is returned only for "0", "false", "off", "no", and ""' an makes no mention of this additional state that can also return false. The behavior is mentioned on the filter_input documentation page under Return Values but that is not overly helpful if one is just looking here.
If FILTER_NULL_ON_FAILURE is not used then NULL is returned when the variable name is not set in the external variable array, TRUE is returned for "1", "true", "on" and "yes" and FALSE is returned for everything else.
Wrinkled Cheese ¶
7 years ago
When validating a URL, as documented, the protocol is not validated. However, it is required to be present.
For example:
I don't expect a protocol to be present. To validate expected input I have to add a "protocol" as a prefix, and return true or false, and further validate the input.
$r = filter_var(''this.doesnt.matter.so.why.is.it.required://'.$host, FILTER_VALIDATE_URL);
return ($r != '' && $r !== false) ? true : false;
Darth Killer ¶
7 years ago
Contrary to what documentation implies, the FILTER_NULL_ON_FAILURE seem to affect any validation filter, not just FILTER_VALIDATE_BOOLEAN. I've been using that since PHP 5.2, and as of PHP 5.6.8 it still works. I have no clue if it's a blug or if it is as intended, in which case the documentation needs to be fixed.
When the flag is used on a validation filter other than FILTER_VALIDATE_BOOLEAN, as expected the filter will return NULL instead of FALSE upon failure. This is quite useful when filtering a POST form with filter_input_array(), where you don't want to check what field is invalid and what field is missing. Just check if NULL is among the returned elements and you're done.
<?php
$definition = array(
'login' => array(
'filter' => FILTER_VALIDATE_STRING,
'flags' => FILTER_NULL_ON_FAILURE
),
'pwd' => FILTER_UNSAFE_RAW
);
$form_data = filter_input_array(INPUT_POST, $definition);
if(in_array(null, $form_data, true)) {
// invalid form
} else {
// valid form, let's proceed
}
?>
Of course, if you want more precise error messages that approach won't work. But it's still good to know, i believe.
kizge ¶
5 years ago
FILTER_VALIDATE_INT first casts its value to string which produces unexpected result for bool and float (https://bugs.php.net/bug.php?id=72490):
<?php
// Prints int(1).
var_dump(filter_var(true, FILTER_VALIDATE_INT));
// ...but this prints bool(false).
var_dump(filter_var(false, FILTER_VALIDATE_INT));
// --------
// Prints bool(false).
var_dump(filter_var(1.1, FILTER_VALIDATE_INT));
// ...but this prints int(0).
var_dump(filter_var(0.0, FILTER_VALIDATE_INT));
// ...but this again is bool(false).
var_dump(filter_var('0.0', FILTER_VALIDATE_INT));
// Also bool(false).
var_dump(filter_var('-0.0', FILTER_VALIDATE_INT));
?>
Live sample: https://3v4l.org/CZW0W
The docs are not clear on how exactly this casting affects the result for certain input values.
php at sethsyberg dot com ¶
11 years ago
When validating floats, you must use the Identical/Not identical operators for proper validation of zeros:
This will not work as expected:
<?php
$x = 0;
if (!filter_var($x, FILTER_VALIDATE_FLOAT)) {
echo "$x is a valid float";
} else {
echo "$x is NOT a valid float";
}
?>
This will work as expected:
<?php
$x = 0;
if (filter_var($x, FILTER_VALIDATE_FLOAT)!== false) {
echo "$x is a valid float";
} else {
echo "$x is NOT a valid float";
}
?>
Luuk ¶
7 years ago
@2:
$value = " 0 ";
$filtered = filter_var($value, FILTER_VALIDATE_INT);
if($filtered || $filtered === 0)
{
// validated as an int
}
I think next code is better:
$value = "0";
if(filter_var($value, FILTER_VALIDATE_INT) !== false)
{
.....
holger dot ahrens at rittec dot de ¶
3 months ago
FILTER_VALIDATE_FLOAT Security Risk CVE-2021-21708 High Risk from
Warning from MITRE Corporation, Common Vulnerabilities and Exposures:
In PHP versions 7.4.x below 7.4.28, 8.0.x below 8.0.16, and 8.1.x below 8.1.3, when using filter functions with FILTER_VALIDATE_FLOAT filter and min/max limits, if the filter fails, there is a possibility to trigger use of allocated memory after free, which can result it crashes, and potentially in overwrite of other memory chunks and RCE. This issue affects: code that uses FILTER_VALIDATE_FLOAT with min/max limits.
(Source: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-21708)
官方地址：https://www.php.net/manual/en/filter.filters.validate.php
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
PHP mkdir()写出来的权限与mode值不符合
Packagist / Composer 中国全量镜像
PHP获取指定函数定义在哪个文件中及行号
支持php7的性能采集扩展
adodb连接mysql多个数据库的问题