PHP - Manual: 对 PUT 方法的支持

2024-11-14

对 PUT 方法的支持

PHP 对部分客户端具备的 HTTP PUT 方法提供了支持。PUT 请求比文件上传要简单的多，它们一般的形式为：

PUT /path/filename.html HTTP/1.1

这通常意味着远程客户端会将其中的 /path/filename.html 存储到 web 目录树。让 Apache 或者 PHP 自动允许所有人覆盖 web 目录树下的任何文件显然是很不明智的。因此，要处理类似的请求，必须先告诉 web 服务器需要用特定的 PHP 脚本来处理该请求。在 Apache 下，可以用 Script 选项来设置。它可以被放置到 Apache 配置文件中几乎所有的位置。通常我们把它放置在 <Directory> 区域或者 <VirtualHost> 区域。可以用如下一行来完成该设置：

Script PUT /put.php

这将告诉 Apache 将所有对 URI 的 PUT 请求全部发送到 put.php 脚本，这些 URI 必须和 PUT 命令中的内容相匹配。当然，这是建立在 PHP 支持 .php 扩展名，并且 PHP 已经在运行的假设之上。 The destination resource for all PUT requests to this script has to be the script itself, not a filename the uploaded file should have.

With PHP you would then do something like the following in your put.php. This would copy the contents of the uploaded file to the file myputfile.ext on the server. You would probably want to perform some checks and/or authenticate the user before performing this file copy.

示例 #1 保存 HTTP PUT 文件


<?php
/* PUT data comes in on the stdin stream */
$putdata = fopen("php://input", "r");

/* Open a file for writing */
$fp = fopen("myputfile.ext", "w");

/* Read the data 1 KB at a time
   and write to the file */
while ($data = fread($putdata, 1024))
  fwrite($fp, $data);

/* Close the streams */
fclose($fp);
fclose($putdata);
?>

add a note

User Contributed Notes 9 notes

down

micronix at gmx dot net ¶

11 years ago


Hello PHP World After many Hours of worryness :=)


I have found the Solution for Resume or Pause Uploads

In this Code Snippet it is the Server Side not Client on any Desktop Programm you must use byte ranges to calculate the uploaded bytes and missing of total bytes.


Here the PHP Code


<?php

$CHUNK = 8192;


        try {

            if (!($putData = fopen("php://input", "r")))

                throw new Exception("Can't get PUT data.");


            // now the params can be used like any other variable

            // see below after input has finished


            $tot_write = 0;

            $tmpFileName = "/var/dev/tmp/PUT_FILE";

            // Create a temp file

            if (!is_file($tmpFileName)) {

                fclose(fopen($tmpFileName, "x")); //create the file and close it

                // Open the file for writing

                if (!($fp = fopen($tmpFileName, "w")))

                    throw new Exception("Can't write to tmp file");


                // Read the data a chunk at a time and write to the file

                while ($data = fread($putData, $CHUNK)) {

                    $chunk_read = strlen($data);

                    if (($block_write = fwrite($fp, $data)) != $chunk_read)

                        throw new Exception("Can't write more to tmp file");


                    $tot_write += $block_write;

                }


                if (!fclose($fp))

                    throw new Exception("Can't close tmp file");


                unset($putData);

            } else {

                // Open the file for writing

                if (!($fp = fopen($tmpFileName, "a")))

                    throw new Exception("Can't write to tmp file");


                // Read the data a chunk at a time and write to the file

                while ($data = fread($putData, $CHUNK)) {

                    $chunk_read = strlen($data);

                    if (($block_write = fwrite($fp, $data)) != $chunk_read)

                        throw new Exception("Can't write more to tmp file");


                    $tot_write += $block_write;

                }


                if (!fclose($fp))

                    throw new Exception("Can't close tmp file");


                unset($putData);

            }


            // Check file length and MD5

            if ($tot_write != $file_size)

                throw new Exception("Wrong file size");


            $md5_arr = explode(' ', exec("md5sum $tmpFileName"));

            $md5 = $md5sum_arr[0];

            if ($md5 != $md5sum)

                throw new Exception("Wrong md5");

        } catch (Exception $e) {

            echo '', $e->getMessage(), "\n";

        }

?>

down

San ¶

8 years ago


Instead of using fread fwrite to save uploaded content to a file.
stream_copy_to_stream is much cleaner.

down

Oscar Fernandez Sierra ¶

6 months ago


This is what worked for me. There are many examples in the web that don't work. I found in https://lornajane.net/posts/2009/putting-data-fields-with-php-curl.

IMPORTANT: You should not use the code

       curl_setopt($ch, CURLOPT_PUT, true);

even if it seems to be the right option (it would be the right option for a POST request, with CURLOPT_POST, but it does not work for a PUT request).

Notice that the constant CURLOPT_CUSTOMREQUEST is used instead of CURLOPT_PUT, and that the value used is "PUT" instead of true.

<?php

        $url = "....."; // put your URL here

        $data = array("a" => $a);

        $ch = curl_init($url);
        curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
        curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "PUT");
        curl_setopt($ch, CURLOPT_POSTFIELDS, http_build_query($data));

        $response = curl_exec($ch);
        if ( ! $response) {
            return false;
        }

down

willy at kochkonsult dot no ¶

6 months ago


All the example code I found for using PUT with PHP always used a default hard-coded file extension for the incoming stream.

The filename from the incoming file PUT request can't be found anywhere from the incoming request (at least I couldn't find it) but mimetype can be found in the $_SERVER global variable.

I used this code to get the correct file extension:

$mimeType = $_SERVER['HTTP_CONTENT_TYPE'];

if ($mimeType!='application/pdf') 
    {   
    header('HTTP/1.1 405 Only PDF files allowed');
    echo("Only PDF files are allowed for upload - this file is ".$mimeType);
    die();
    }
else $fileExtension = 'pdf';

If you have an Apache Tika server available, that would be the best option to analyze the file content to get the mimetype, but that might not be in scope for everyone :-)

down

-4

yaogzhan at gmail dot com ¶

16 years ago


PUT raw data comes in php://input, and you have to use fopen() and fread() to get the content. file_get_contents() is useless. 

The HTTP PUT request MUST contain a Content-Length header to specify the length (in bytes) of the body, or the server will not be able to know when the input stream is over. This is the common problem for many to find the php://input empty if no such header available. 

This should make PUT work properly on win32 using PHP5.1.1 and apache2.

down

-6

gherson ¶

16 years ago


A Case Study:  To set up publishing with Netscape 7.2 Composer to Apache/PHP, no need to use CGI (which I tried unsuccessfully for too long) or to alter Apache's httpd.conf.  I needed only to click Publish As, fill in put2disk.php as the filename (where its contents are the below), and fill in that file's dir as the "Publishing address".
XAMPP 1.4.14: Apache/2.0.54 (Win32) mod_ssl/2.0.54 OpenSSL/0.9.7g PHP/5.0.4.

<? // filename: put2disk.php.

//file_put_contents ("get_def.out", print_r (get_defined_vars(), TRUE)); // debugging

// Two slurp methods: (a) didn't work, (b) did.
//$stdin_rsc = fopen("php://input", "r");
//$putdata='';
//while ($putdata .= fread($stdin_rsc, 1024)); // a. Hangs the "Publishing..." dialog.
//while (!feof($stdin_rsc)) $putdata.=fread($stdin_rsc, 8192); // b. Worked, but file_get_contents is faster.
//fclose($stdin_rsc);

// All that's nec:
$putdata=file_get_contents('php://input'); // Not php://stdin! (When the ability to see error messages isn't available, the doc (this manual page) needs to be more accurate.)

file_put_contents("stdin.out",$putdata);
?>

down

-8

warhog at warhog dot net ¶

16 years ago


NOTE: The <Script>-Directive can not be placed in .htaccess files.

So if you're having shared webspace and no access to the apache-configuration file you will have little chance to make something like this work.

But you can solve the problem, using mod_rewrite (for Apache) - for further information see the documentation at http://httpd.apache.org/docs/2.0/mod/mod_rewrite.html

down

-10

mikeb at mikebanahan dot com ¶

18 years ago


I have spent a lot of time trying to make PUT work with Apache 2.0.40. I have not yet been able to find any way of making the Script directive invoke php via mod_php, the only way has been to have a file called example.cgi and invoke it via CGI, with the file starting
#!/usr/bin/php
so the PHP interpreter is invoked through the CGI mechanism and not as a module.

If there IS a way of making it work 'right' I'd love to know! After six hours of messing around, I've settled for CGI. The error messages in the apache error log are significantly misleading and the whole thing has been an exercise in frustration.

Attempts to use AddHandler and all 'normal' ways of trying to persuade Apache to do this have been fruitless. It does seem as if PUT can only be handled by CGI invocation.

down

-37

kicaj ¶

8 years ago


to create variable such as $_GET, $_POST use
that solution

<?php
    $_SERVER['REQUEST_METHOD']==="PUT" ? parse_str(file_get_contents('php://input', false , null, -1 , $_SERVER['CONTENT_LENGTH'] ), $_PUT): $_PUT=array();
?>

add a note

官方地址：https://www.php.net/manual/en/features.file-upload.put-method.php

有任何技术问题请点击这里网站运营推广招聘

IT PHP 编程语言 Linux 开发编程科技 Elasticsearch HTML/CSS/XML 网络 JAVA NoSQL 数据库面试 C/C++ Golang Git 算法操作系统正则表达式 Redis 互联网 MySql JavaScript 运维软件国际架构设计 Mac OS TCP/IP Excel Vim Windows Socket Oracle VR MongoDB Python 运营 MemCache 商业硬件电子娱乐设计 nginx 摄影游戏 WordPress HTTP 团建数码电器

php7 安装fileinfo扩展 preg_split — 通过一个正则表达式分隔字符串 php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题 [PHP] inet_pton/inet_ntop IP地址转换函数 array_multisort() 多字段排序 PHPMailer设置utf8 PHPMailer字符集CharSet ADORecordSet对象 adodb手册 PHP 8.1 [鸟哥]PHP_INT_MIN 和 -9223372036854775808 opcache预加载 Composer的Packagist资源 mysql面试题 [鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式 PHP7添加redis扩展 PHP mkdir()写出来的权限与mode值不符合 Packagist / Composer 中国全量镜像利用php soap实现web service PHP获取指定函数定义在哪个文件中及行号支持php7的性能采集扩展

略微加速

PHP官方手册 - 互联网笔记

对 PUT 方法的支持

User Contributed Notes 9 notes